NEC MultiSync A900 User Manual page 8

Controls cont.
Tools 1
Reduces horizontal moire patterns.
Reduces vertical moire patterns.
Tools 2
Degauss Control: Eliminates the buildup of stray magnetic fields that
alter the correct scan of the electron beams and affect the purity of the
screen colors, focus and convergence. When activated, your screen
image will jump and waver a bit as the screen is demagnetized.
Caution: Please allow a minimum of 20 minutes to elapse
Indicates the frequency setting of the monitor.
IPM ™ System:
NOTE: For standard systems and graphics boards, keep the
Selecting ALL RESET allows you to reset all OSM
the factory settings except IPM System. Individual settings can be reset
by highlighting the control to be reset and pressing the RESET button.
78133961.MultiL
between uses of the Degauss Control.
On: The IPM System works normally and all stages
of energy savings are utilized.
Off: The Off Mode of the IPM System is not used.
factory setting at ON.
8
™ control settings back to
6
9/10/98, 12:03 PM