Specifications - NEC MultiSync 77F User Manual

Specifications

Monitor
Specifications
Picture Tube
Viewable Image Size:
Input Signal
Analog input:
Display Colors
Horizontal:
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
MS77F97F112701.p65
MultiSync ® 77F
Monitor
Diagonal: 17 inch
16.0 inch
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Unlimited number of Colors
31 kHz to 70 kHz
Vertical: 55 Hz to 120 Hz
640 x 480 @ 60 to 120 Hz
800 x 600 @ 55 to 110 Hz
832 x 624 @ 55 to 106 Hz
1024 x 768 @ 55 to 87 Hz ....................... NEC-Mitsubishi Electronics Display cites
1152 x 870 @ 55 to 77 Hz
1280 x 1024 @ 55 to 66 Hz
310 mm/12.2 inches
Vertical: 232 mm/9.1 inches
325 mm/12.8 inches
244 mm/9.6 inches
AC 100 – 240 V, 50-60 Hz
1.5A @ 100 – 240 V
403 mm (W) x 420 mm (H) x 420 mm (D)
15.9 inches (W) x 16.5 inches (H) x 16.5 inches (D)
16.7 kg
36.8 lbs
0°C to +35°C
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
-20°C to +60°C
Humidity: 10% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
9
11
Notes
90° deflection, 0.21-0.25 mm variable
horizontal dot pitch, 0.24-0.28 mm variable
diagonal dot pitch, medium short persistence
phosphor, multi-layered, anti-static screen
coating, semi-tint screen, Invar Shadow Mask
and OptiClear screen.
®
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
recommended resolution at
85 Hz for optimal display performance.
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
11/27/01, 3:15 PM