Download  Print this page

Switching Between Anynet+ Devices; Recording; Listening Through A Receiver - Samsung pl43d450 User Manual

Hide thumbs

Advertisement

Advanced Features

Switching between Anynet+ Devices

¦
1. Anynet+ devices connected to the TV are listed.
If you cannot find a device you want, press the Red button to refresh the list.
2. Select a device, and then press the ENTERE button. You can switch to the selected device.
The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu.
x
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
x
If you have selected an external input mode by pressing the
Make sure to switch to an Anynet+ device by using the Device List.

Recording

¦
You can make a recording of a TV Program using a Samsung recorder.
1. Select Recording.
When there are more than two recording devices
x
When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
When the recording device is not displayed, select Device List and press the Red button to search for devices.
2. Press the
EXIT
button to exit.
You can record the source streams by selecting Recording: (device_name).
Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device's users manual.

Listening through a Receiver

¦
You can listen to sound through a receiver (i.e Home Theater) instead of the TV Speaker.
1. Select Receiver and set to On.
2. Press the
EXIT
button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of the receiver to the
OUT (OPTICAL)
When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV's Optical jack. When
the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is
a digital component such as a DVD and is connected to the TV via HDMI, you will hear only 2 channel sound from
the receiver.
NOTE
x
You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
x
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
x
The Anynet+ functions do not operate with other manufacturers' products.
28
English
jack of the TV.
SOURCE
button, you cannot use the Anynet+ function.
DIGITAL AUDIO

Advertisement

Chapters

Table of Contents

   Also See for Samsung pl43d450

Comments to this Manuals

Symbols: 0
Latest comments: