Advertisement
5. Waterproof Installation and Protect Device
5. Waterproof Installation and Protect Device
5. Waterproof Installation and Protect Device
5. Waterproof Installation and Protect Device
Most of the problems of outdoor models are from the connector
connections that loosen over time due to vibration or other forces, even
allowing moisture to penetrate the connector and seriously affecting the
data and radio signal transmit. The following recommendation is used for
all outdoor installation to be waterproofed.
Step1:
Fasten all connectors securely together.
Step2:
Tightly wrap two layers of self-bonding insulating tape forward and
backward over the physical connection extending 2 inches beyond the
connectors or the end of heat-shrinkable tubing on the RF coaxial cable or
omni- antenna connector, and overlapping the tape on each turn.
Step3:
Recover again by tape more cover 1.5cm.
5
V1.0
Advertisement
