Epson stylus CX4100 series User Manual page 98

■
Make sure the Stylus CX is placed on a flat, stable surface.
■
Select
Unsharp Mask Filter
Adjusting the Color and Other Image Settings for instructions.
■
Adjust the
Auto Exposure
See Adjusting the Color and Other Image Settings for instructions.
You can also select
Configuration window, or select the
button to return the Auto Exposure setting to the default. See EPSON
Value
Scan Help for details.
■
Increase the Resolution setting. See Selecting the Scan Resolution for instructions.
Colors are patchy or distorted at the edges of your image.
If your document is very thick or warped at the edges, cover the edges with paper to
block external light as you scan.
Your scanned image is too dark
■
Change the Display Gamma setting to match your output device, such as a
monitor or printer, in the EPSON Scan Configuration window. See EPSON
Scan Help for details.
■
Adjust the
Auto Exposure
See Adjusting the Color and Other Image Settings for instructions.
You can also select
Configuration window, or select the
button to return the Auto Exposure setting to the default. See EPSON
Value
Scan Help for details.
■
Check the Brightness setting in EPSON Scan's Home or Professional Mode (see
Adjusting the Color and Other Image Settings). Or adjust brightness using the
Histogram in Professional Mode (see EPSON Scan Help).
■
Check the brightness and contrast settings of your computer monitor.
in EPSON Scan's Professional Mode window. See
setting in EPSON Scan's Professional Mode window.
and
Color Control
Color
setting in EPSON Scan's Professional Mode window.
and
Color Control
Color
Continuous auto exposure
tab and click the
Continuous auto exposure
tab and click the
in the
Recommended
in the
Recommended
102