Epson stylus CX4100 series User Manual page 93

The Stylus CX sounds as though it is printing, but nothing prints.
■
Make sure the print head nozzles are not clogged. For instructions, see Cleaning
the Print Head.
■
The Stylus CX won't operate properly if it's tilted or at an angle. Place it on a flat,
stable surface that extends beyond the base in all directions.
The Stylus CX makes noise when you turn it on or after it has been sitting for
awhile.
The Stylus CX is performing routine maintenance.
You don't see the
(taskbar) in Windows.
Try restarting your computer. If you still don't see the icon, follow these steps:
1. Click
Start
2. Right-click your Stylus CX and select
3. Click the
4. Click the
button.
5. Click the
Printing is too slow.
Make sure your system meets the requirements listed in System Requirements. If
you're printing a high-resolution image, you need more than the minimum
requirements listed. You may also need to:
■
Clear space on your hard drive or run a defragmentation utility.
■
Close programs that you're not using.
■
Increase your system's memory.
For the fastest printing, try these tips:
■
Choose black ink in your printer settings if your document doesn't include color.
■
For Windows, choose
97
printer icon in the lower right corner of your screen
, point to
Settings
tab.
Maintenance
Speed and Progress
box. Then click
Shortcut Icon
for Quality Type.
Draft
or
Printers and Faxes
Printing Preferences
button, then click the
to close the open windows.
OK
, then select
Printers
.
Monitoring Preferences
.