Basic Operations; Power; To Turn The Unit On And Off; Volume - NEC PlasmaSync 4200W User Manual

Basic Operations

POWER

To turn the unit ON and OFF:

1. Plug the power cord into an active AC power outlet.
2. Press the POWER button (on the remote controller) to
turn on.
The monitor's POWER/STANDBY indicator will light
up(green) when the unit is on.
3. Press the POWER button (on the remote controller or
the unit) to turn off.
The monitor's POWER/STANDBY indicator turns red
and the standby mode is set.

VOLUME

To adjust the volume:

1. Press and hold the VOLUME
controller or the unit) to increase to the desired level.
2. Press and hold the VOLUME
controller or the unit) to decrease to the desired level.

MUTE

To cancel the sound:

Press the MUTE button on the remote controller to cancel
sound; press again to restore.

DISPLAY

To check the settings:

1. The screen changes each time the DISPLAY button is
pressed.
2. If the button is not pressed for approximately three sec-
onds, the menu turn off.
button (on the remote
button (on the remote
13

VISUAL CONTROL

TO adjust the picture's contrast:

1, Press and hold the CONTRAST
contrast.
2, Press and hold the CONTRAST
contrast.

TO adjust the picture's brightness:

1, Press and hold the BRIGHT
picture.
2, Press and hold the BRIGHT
ture.

TO adjust the picture's color:

1, Press and hold the COLOR
saturation.
2, Press and hold the COLOR
ration.

TO adjust the picture's tint (NTSC only):

1, Press and hold the TINT
2, Press and hold the TINT

TO adjust the picture's sharpness:

1, Press and hold the SHARPNESS
picture.
2, Press and hold the SHARPNESS
picture.
*If no key operation is made within five seconds, the OSM
display will disappear.
button for higher
button for lower
button for a brighter
button for a darker pic-
button for more color
button for less color satu-
button for a greener tint.
button for a redder tint.
button for a sharper
button for a softer