NEC PlasmaSync 4200W User Manual page 30

Information
Screen modes
FULL* ................. The image is displayed over the
entire screen. Set this mode for wide
images. (16 : 9)
An 800 600 input signal is con-
verted to an 800 480 signal.
NORMAL* .......... Set this mode for the same size as
normal VIDEO pictures (4:3).
An 800 600 input signal is con-
verted to a 640 480 signal.
* For compatibility set Table for Signals Supported on
page 36.
Adjusting the position of the computer image
V-POSITION ....... Adjusts the vertical position of the
image.
H-POSITION ...... Adjusts the horizontal position of
the image.
FINE PICTURE .. Adjusts for flickering.
PICTURE ADJ. ... Adjusts for striped patterns on the
image.
Restoring the factory default settings
Select "RESET" under the function menu. Note that this
also restores other settings to the factory defaults.
25