Princess 184000 User Instructions page 15

16 When you have finished deep frying
food, remove the plug from the wall
socket.
Resetting
If the appliance is not functioning properly
or when it generates an error, you can
reset the electronic control unit by
operating the RESET switch at the rear of
the electronic control unit:
1 Move the switch on the left rear side of
the electronic control unit up to reset
the electronic control unit.
Frying time and temperatures
Food
Frozen fries 500 g.
Frozen fries 400 g.
Minced-meat hot dogs
Croquettes
White fish fillet portions
in breadcrumbs or
batter
Fresh prawns in batter
Chicken portions in
breadcrumbs:
• small/medium size
• large size
Fresh chicken
drumsticks in
breadcrumbs
Frozen chicken nuggets
Fruit fritters 2-3 pieces
Vegetable fritters
Frozen onion rings
Fresh onions/
mushrooms
You may change the time and temperature
settings according to your personal taste.
10
Article 184000 Princess Eco Shower Fryer
Frying Temp.
time (°C)
(min)
8 190
6 190
6 190
7 190
10-15 170
3-5 190
15-20 170
20-30 170
15 170
6-8 190
3-5 190
3-5 190
3-5 190
3-5 150
Use as a regular fryer
This Princess Eco Shower Fryer can also
be used as a regular fryer. Use as follows:
1 Remove the lid from the fryer.
2 Remove the basket.
3 Take the electronic control unit out of
the appliance and remove the pump
from the unit by turning it anticlockwise
(see figure 3).
4 Position the electronic unit in the
appliance. Make sure the unit slides
into the guide at the rear of the
appliance.
5 Fill the appliance with min. 2.5 L till
max. 3 L of oil/liquid fat till the level is
between the minimum and maximum
indicator in the removable pan (see
figure 5).
6 Place the lid on the fryer.
7 Insert the plug into the wall socket. The
appliance will beep shortly and the
display will alternately show the set
temperature and the frying time.
8 Press the button repeatedly until the
display shows the desired oil
temperature setting. The setting can be
adjusted from 150° C to 190° C in steps
of 10° C.
Consult the packaging of the food for
the required temperature setting.
9 Press the /+ button once to set the
time to 1 minute.
10 Press the O/I button to start the heating
process.
The countdown of the clock in the
display will start after the oil/liquid fat
has reached the set temperature.
One minute after the set temperature is
reached, the appliance switches off
automatically.
Note: When the set temperature is
reached, you will hear the electric
motor, which normally drives the oil
pump. This is normal operation.
11 Fill the basket with the food to be fried.
Do not overfill the basket to avoid
irregular and undesired results.