Timer Mode - NEC RIH-6867 User Manual

Operation instructions

Timer mode

It is convenient to set the timer on with
to achieve a comfortable room temperature at the time you get home. You can also set
timer off at night to enjoy a good sleep.
Setting a switch-on
timer when the
appliance is off.
As time goes by, LCD on remote controller only displays the remained time instead of
set temperature.
The previous set time is stored and the next set time begins with the previous setting.
On- timer and off-timer can not be set at the same time.
The room may not reach your desired temperature within the preset time because of
different size of room.
Set desired operating mode, temperature setting and indoor fan speed firstly,
then press the
Point the remote control at the signal receptor of the indoor unit,
press the or
then press the
Press the
Each time the
If the desired time is within 10 hours, the set time increases or decreases by 0.5 hour;
If desired time is beyond 10 hours, increases or decreases by 1 hour.
The range can be set is 0.5 hour to 24 hours.
To cancel the set timer: press the
and the timer indicator on the indoor unit
PDF created with pdfFactory Pro trial version
TIMER
Timer-setting
Example: set an operation after 9.5 hours
TIMER button and "h" flashes on LCD.
button when "h" flashes. Choose the timer you want ,
TIMER button.
A "beep" can be heard.
Timer indicator on the indoor unit lights up.
"h" stops flashing.
TIMER button, "h" flashes on the LCD, then you can set the time.
or button is pressed,
TIMER
button when you go out in the morning
Setting a switch-off timer
during operation.
button again, a "beep" can be heard
swithes off.
10
www.pdffactory.com
S U PE R
S M A R T
2
2
SLEEP
1
1
2
3