Advertisement
1
Attach the adapter for your iPod/iPhone.
2
Insert your iPod/iPhone into the
connector of the unit.
Universal dock adapter
~ ~
@
@
3
Press iPod & iPhone
~II.
The iPod begins to play automatically.
You can operate the connected iPod by this
unit or the iPod buttons.
4
Adjust the volume using VOLUME
+
or -
(VOL
+
or - on the remote).
To stop listening
Press OFF/ALARM RESET (OFF on the remote),
and stop playback on the connected unit.
Notes
• Refer also to the connected equipment's manual.
• The supplied audio connecting cable may not
be used with some external equipment. In this
case, use a cord suitable for the external
equipment you are using.
• When you listen to the radio with external
equipment connected, turn off the connected
equipment to prevent noise. If noise occurs,
even when the equipment is turned off,
disconnect and place the external equipment
away from the unit.
To return to the iPod
Press iPod
&
iPhone
~II.
To turn off the unit before the preset
time
Press SNOOZE/DATE/SLEEP OFF (SNOOZE on
the remote) or OFF/ALARM RESET (OFF on the
remote).
To change the sleep timer setting
You can press SLEEP repeatedly to select the
desired sleep timer setting even after the sleep
timer has been activated.
2
Press AUDIO IN to display ''AUDIO IN:'
3
Play the equipment connected to the
AUDIO IN jack.
4 Adjust the volume using VOLUME
+
or-
(VOL
+
or - on the remote).
To return to the radio
Press RADIO BAND.
First the preset number, then the frequency of the
last station is shown in the display.
To deactivate the sleep timer
Press SLEEP repeatedly to set the sleep timer to
"OFF"
in step
2.
1 Press SLEEP while the unit is turned on.
"SLEEP" appears and the sleep time flashes in
the display.
2
Press SLEEP to set the sleep timer
duration.
Each time you press SLEEP, the duration (in
minutes) changes as follows:
90-+60-+30-+15
L-OFF..-J
Other useful functions
To listen to sound
1
Connect the AUDIO IN jack of the unit
to the line out jack or headphone jack of
the external equipment using the audio
connecting cable (supplied) .
Setting the sleep timer
To get the MEGA Xpand effect
Press MEGA Xpand. "MEGA Xpand" appears in
the display. You can get the effect of expansion of
the sound field. To return to normal sound, press
the button again.
You can fall asleep to music, etc., using the built-
in sleep timer that turns off the unit automatically
after a preset duration.
The display returns to clock mode for about
4 seconds after you have finished the duration
setting and released SLEEP, and then the sleep
timer starts.
The unit will play for the duration you set. and
then shut off.
Connecting external
equipment
C;wfrl
,
0
Audio connecting cable
~
(supplied)
T
To external
~«'T""'fl
equipment
To get the MEGA BASS effect
Press MEGA BASS. "MEGA BASS" appears in the
display. You can get the effect of bass of high
quality sound. To return to normal sound, press
the button again.
7
If
"1\'
or "B" does not appear in the
display, press - ALARM SET A or B
again.
The radio
will
turn on at the set time.
To confirm an alarm time setting
Press
TIME SET
+
or -.
The
setting will be
displayed for about 4 seconds.
[Q
Setting the Buzzer Alarm
1
Perform steps 1 to 8 in "To set the alarm:'
2
Press - ALARM SET A or B to select
"BUZZER" alarm mode.
The setting is entered.
3
If
"K
or "B" does not appear in the
display, press· ALARM SET A or B
again.
The buzzer will sound at the set time.
Note
The volume cannot be set for the buzzer alarm.
To change an alarm setting
Press and hold
TIME SET
+
for at least
2
seconds
to move the alarm time forwards. Press and hold
TIME SET -
for at least
2
seconds to move the
alarm time back.
When you release the button, the changed time
will flash for about
2
seconds. To change the
alarm time again, press
TIME SET
+
or - within
these
2
seconds, otherwise the setting change
will
be fixed as displayed.
To doze for a few more minutes
Press SNOOZE/DATE/SLEEP OFF (SNOOZE on
the remote).
The sound turns off but will automatically come
on again after about
10
minutes.
You can change the snooze time
by
pressing
SNOOZE/DATE/SLEEP OFF (SNOOZE on the
remote) repeatedly within 4 seconds.
The maximum length of the snooze time is
60 minutes.
To stop the snooze timer, press
OFF/ALARM
RESET (OFF on the remote).
To activate the alarm
Press· ALARM ON/OFF A or B to turn on the
alarm A or
B
indicator in the display.
Notes
• With the alarm mode is set to iPod, when the
alarm time met,
if
iPod is not attached to the
unit, the alarm sound will be the buzzer.
• The alarm function works as usual on the first
and last day of Daylight Saving Time (summer
time). As a result, if the Automatic DSTI
Summer Time adjustment is set and the alarm
is set at a time skipped when the Daylight
Saving Time begins, the alarm is skipped; if the
alarm is set to a time that overlaps when
Daylight Saving Time ends, the alarm will
sound twice.
• If the same alarm time is set for both alarm A
and B, alarm A takes priority.
• If there is no operation while the alarm is
occurring, the alarm
will
stop after about
60 minutes.
To stop the alarm
Press OFF/ALARM RESET (OFF on the remote)
to turn off the alarm.
The alarm will sound again at the same time the
next day.
To deactivate the alarm
Press· ALARM ON/OFF A or B to turn off the
alarm A or B indicator from the display.
Note on the alarm in the event of a power
interruption
In the event of a power interruption, the alarm
will
work until the battery is totally discharged.
However, certain functions will be affected as
follows:
• The backlight will not light up.
• If the alarm mode is set to iPod or radio, it will
change to buzzer automatically.
• JfOFF/ALARM RESET (OFF on the remote) is
not pressed, the alarm will sound for about
5 minutes.
•
If"~"
appears in the display, the alarm will not
sound in the event of a power interruption.
Replace the battery if
"c...'\)"
appears.
• The snooze function cannot be set during a
power interruption. If the snooze function has
already been set and a power interruption
occurs, the snooze function
will
not work.
• During a power interruption, each alarm will
sound at the set time only once.
IAJ
Setting the iPod alarm
1
Perform steps 1 to
8
in "To set the alarm:'
2
Press - ALARM SET A or B to select
''iPod'' alarm mode.
"VOLUME" appears in the display.
3
Press TIME SET + or - to adjust the
volume.
4
Press. ALARM SET A or B.
The setting is entered.
S
Jf"K or "B" does not appear in the
display, press· ALARM SET A or B
again.
The iPod
will
sound at the set time.
When using an iPod touch/iPhone
• To wake up to music stored in an iPod touch
I
iPhone, connect the iPod touchliPhone to the
unit first, follow the steps above to set alarm
time, and then select the music function.
• Even if the iPod alarm setting is complete, if
you turn the iPod touch/iPhone power off
before the unit, the iPod alarm
will
not work.
On copyrights
• iPod is a trademark of Apple Inc., registered in
the
u.s.
and other countries.
• iPhone is trademark of Apple Inc.
• All other trademarks and registered trademarks
are of their respective holders. In this manual,
1'M
and
~
marks are not specified.
• "Made for iPod" means that an electronic
accessory has been designed to connect
specifically to iPod and has been certified by the
developer to meet Apple performance
standards.
• "Works with iPhone" means that an electronic
accessory has been designed to connect
specifically to iPhone and has been certified by
the developer to meet Apple performance
standards.
• Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
To set the alarm
1
Press and hold· ALARM SET A or B.
"WAKE UP" appears and the hour flashes in
the display.
2
Press TIME SET
+
or - repeatedly until
the desired hour appears.
To cycle the hour rapidly, press and hold TIME
SET
+
or-.
3
Press - ALARM SET A or B.
The minute flashes.
4
Repeat step
2
to set the minute.
S
Press. ALARM SET A or B.
The days of the week flash.
6
Repeat step 2 to set the days of the week.
You can select the days from the following
three options:
Every day: SUN MON TUE WED THU FRI
SAT
Week day: MON TUE WED THU FRJ
Week end: SUN SAT
7
Press - ALARM SET A or B.
The alarm mode setting is entered.
8
Press TIME SET
+
or - repeatedly until
the desired alarm mode flashes.
You can choose one of 5 settings: "iPod':
"FM I'; "FM2': "AM" or "BUZZER:' Set the
alarm mode as follows:
- iPod: see
"[AI
Setting the iPod alarm:'
- FM
I,
FM2 or AM:
see"~
Setting the radio
alarm:'
- BUZZER: see
"[Q]
Setting the buzzer alarm:'
Setting the alarm
This clock radio is equipped with
3
alarm
modes-iPod, radio and buzzer. Before setting the
alarm, make sure to set the clock (see "Setting the
clock for the first time").
~ Setting the radio alarm
1
Perform steps 1 to 8 in "To set the alarm:'
2
Press - ALARM SET A or B to select
radio band ("FMr: "FM2" or "AM").
Preset number flashes in the display.
3
Press TIME SET + or - to select the
desired preset number corresponding the
bands or"- -".
"- -" is the last station received.
4 Press - ALARM SET A or B.
"VOLUME" appears in the display.
S
Press TIME SET
+
or - to adjust the
volume.
6
Press - ALARM SET A or B.
The setting is entered.
~
(backward)'
iPod
&
iPhone
~II
To resume play,
press it again.
MENU"
OFF,
or press and
hold iPod
&
iPhone
~II
_
(forward) or
~
(backward)
while playing and
hold it until you
find the point.
Press
. . . (forward) or
~
(backward)
in pause and hold
it until you find
the point.
ENTER"
MODE
• (up)/. (down)"
_(forward)
To
Locate a point while
observing the display
Go back to the previous
track
Pause playback
Turn off the iPod
Go back to the previous
menu
Locate a point while
listening to the sound
Go to the next track
Execute the selected menu
or begin playback
Change to the shuffle mode
Select a menu item or a
track for playback
Notes
• When inserting an iPod into the unit, be sure to
use the universal dock adapter supplied with your
iPod or commercially available from Apple Inc.
• The connector of the unit is exclusively for use
with an iPod. If you use a device that does not
match the connector. connect it to the AUDIO
IN terminal of this unit with the supplied audio
connecting cable.
• Sony cannot accept responsibility in the event
that data recorded on an iPod is lost or damaged
when using an iPod connected to this unit.
• For details of environmental conditions for
operating your iPod, check the website of Apple
Inc.
" During playback, this operation goes back to
the beginning of the current track. To go back
to the previous track, press twice.
*"
These operations are available only when using
the supplied remote commander.
Notes
• When placing or removing the iPod, hold the
iPod at the same angle as that of the connector
on this unit, and do not twist or bend the iPod
as connector damage may result.
• Do not carry the unit with an iPod set on the
connector. Doing so may cause a malfunction.
• When placing or removing the iPod, hold the
Docking Tray securely with one hand and take
care not to press the controls of the iPod by
mistake.
• Before disconnecting the iPod, pause playback.
To use the unit as a battery charger
You can use the unit as a battery charger.
Charging begins when the iPod is connected to
the unit.
Charging status appears in the iPod display. For
details, see the user's guide of your iPod.
Advertisement
