Advertisement
Playing an iPod
You can enjoy iPod audio by connecting to this
unit. To use an iPod, refer to the user's guide of
your iPod.
If you are using an iPhone or iPhone 3G. attach
the supplied universal dock adapter for iPhone or
iPhone 3G before inserting into the connector.
The adapter number,
@
or
@,
is shown on the
bottom-rear of the supplied universal dock
adapters.
@
is for the iPhone, and
@
is for the
iPhone 3G. Check the adapter number before use.
'1 '1'1
FM2
DJ,D
Sf
FM: Extend the FM wire antenna fully to increase
reception sensitivity.
AM: Connect the supplied AM loop antenna to
the unit. Rotate the antenna horizontally for
optimum reception.
After a while, the display
will
return to the
current time.
To preset another station, repeat these steps.
To change the preset station, tune into the
desired station and hold down the STATION·
SELECT - PRESET
1
to 5 button. The new
station will replace the previous station on the
preset button.
Example: To preset FM 89.8 MHz onto the
preset 1 button.
Improving the reception
Notes On radio reception
• Keep digital music players or mobile phones
away from the AM loop antenna or the FM
antenna. as this may lead to reception
interference.
• When you are listening to the radio with an
iPhone connected to the unit, interference with
radio reception may occur.
• When you are listening to the radio while
charging an iPod, interference with radio
reception may occur.
Tip
If the FM broadcast is noisy. press MODE until
"MONO" appears in the display, the radio will
play in monaural and the sound
will
become
clearer.
To display the preset number and
frequency of the current station
Press DISPLAY/MEMORY once for the preset
number. and press
it
again for the frequency.
If you press DISPLAY/MEMORY once only, the
display shows the preset number for about
2 seconds. then changes to the frequency.
After a few moments, the display returns to the
current time.
-Auto preset tuning
1
Follow steps 1 to 2 in "Manual tuning"
and select the AM or FM band.
2
Press and hold RADIO BAND until "AP"
flashes in the display.
3
Press DISPLAYIMEMORY.
The unit automatically presets the available
channels in order.
Tip
To stop auto preset tuning, press OFF/ALARM
RESET.
Tuning in to a preset station
1 Follow steps 1 to 2 in "Manual tuning"
and select the AM or FM band.
2
Press one of the STATION· SELECT
- PRESET buttons where the desired
station is stored.
The preset station can also be selected by
PRESET
+
or - on the remote.
3
Adjust the volume using VOLUME
+
or -
(VOL
+
or - on the remote).
Presetting a station
1 Follow steps 1 to 4 in "Manual tuning"
and manually tune into the station you
wish to preset.
2
Press and hold the desired STATION·
SELECT - PRESET 1 to S buttons until
the preset number display changes from
flashing to fully lit.
-Preset tuning
You can preset up to 10 stations in FM (5 stations
in FMl. 5 stations in FM2). and 5 stations in AM.
Playing the radio
-Manual tuning
1 Press RADIO BAND to turn on the radio.
2
Press RADIO BAND repeatedly to select
the desired band.
Each press changes the band as follows:
r
FM!
--+
FM2
--+
AM
J
FM land FM2 are the same frequency bands.
3
Press TUNING
+
or - (TUNE
+
or - on
the remote) to tune into the desired
station.
4 Adjust volume using VOLUME
+
or-
(VOL
+
or - on the remote).
To turn off the radio, press OFF.
Tuning in to a station
The unit automatically scans AM or FM stations.
1 Follow steps 1 to 2 in "Manual tuning"
and select the AM or FM band.
2
Press and hold TUNING
+
or - (TUNE
+
or - on the remote).
+ : scans upward through the frequency bands.
- : scans downwards through the frequency
bands.
Scanning starts from the currently-tuned
frequency. When a station is received,
scanning stops.
3
Adjust the volume using VOLUME
+
or-
(VOL
+
or - on the remote).
To display the year and date
Press SNOOZE/DATE/SLEEP OFF (SNOOZE on
the remote) once for the date, and press
it
again
for the year.
After a few seconds. the display will change back
to the current time automatically.
Setting the brightness
of the display
Three levels of brightness are available by pressing
• BRIGHTNESS.
Hit (default) -
Middle -
Low
J
Even if you set the level of bright ness to Low, it
will be changed to Middle, while ALARM is
occurring.
• To activate Automatic DST/Summer Time
adjustment again, press and hold CLOCK and
SNOOZE/DATE/SLEEP OFF at the same time
at least 2 seconds.
"." and "On" appear in the display to show that
Automatic DST/Summer Time adjustment has
been activated. The display returns to the clock.
1 Plug in the unit.
2
Press and hold CLOCK until the year
flashes in the display.
3
Press TIME SET
+
or - repeatedly to set
the year.
4 Press CLOCK.
S
Repeat steps 3 and 4 to set the month,
day, hour and minute, and then press
CLOCK,
The seconds start incrementing from zero.
Notes
• If you do not press any button for about
1 minute while setting the clock. the clock
setting will be canceled.
• A calendar is installed in this unit. When the
date is set, the day of the week is automatically
displayed.
MaN
=
Monday, TUE
=
Tuesday,
WED
~
Wednesday. THU
=
Thursday,
FRI
=
Friday, SAT
=
Saturday, SUN
~
Sunday
Setting the clock manually
FMwire
antenna
@Q
@
0
To cancel Automatic DSTISummer TIme
adjustment during the Daylight Saving
Time (summer time) period
The Automatic DST/Summer Time adjustment
can be canceled.
Press and hold CLOCK and SNOOZE/DATE/
SLEEP OFF at the same time at least 2 seconds
while the clock is displayed.
"." and "OFF" appear in the display to show that
Automatic DST/Summer Time adjustment has
been canceled. The display returns to the clock.
Notes
• Changes to Automatic DSTISummer Time
adjustment by the unit (see above) are subject
to circumstances and laws in each countryl
region. Should this interfere with desired
adjustment, cancel the Automatic DST/Summer
Time adjustment and set the DST display
manually as necessary. Customers living in a
countrylregion that does not use Daylight
Saving Time (summer time) must cancel
Automatic DST/Summer Time adjustment
before using the unit.
When Daylight Saving Time
(summer time) begins
This model automatically adjusts for Daylight
Saving Time (summer time).
..... is displayed from the beginning of Daylight
Saving Time (summer time) and disappears at the
end of Daylight Saving Time (summer time)
automatically.
• Daylight Saving Time (summer time) begins at:
2:00 AM on the second Sunday of March.
• Standard Time begins at: 2:00 AM on the first
Sunday of November.
==AM-',-,.,-,
,_,iPOdFMI2AM<s;J
MON ruE
BUZZER AUo/OIN
WEOTHU
PM_ _
_
_
PRESETSTMONO
FRISAT
,
"
, . , ' "
WAKEUP
•
$g~ME~ ~. ~I~
'*'SlEEP :
AC power cord
~====================~
(
SNOOZE
I
DATE
I
SLEEP OFF)
Area number
Time zone
Pacific standard Time
The STATION. SELECT - PRESET 3, VOLUME
+
and iPod
&
iPhone HI buttons have a
tactile dot.
Mountain standard Time
(default setting)
Central standard Time
Setting the clock for
the first time
Eastern standard Time
Atlantic standard Time
Yukon standard Time
4 Press -TIME ZONE to set.
Note
Though the clock is correctly set at the factory,
discrepancies may arise during transport or
storage. If necessary. set the clock to the correct
time by referring to "Setting the clock manuaUY:'
The
~II
and VOL
+
buttons have a tactile dot.
Hawaiian standard Time
This unit is preset to the current EST (Eastern
Standard Time) at the factory. and is powered by a
backup battery. All you need to do the first time is
just plug it in and select your time zone.
1
Plug in the unit.
The current EST (Eastern Standard Time)
appears in the display.
2
Press and hold - TIME ZONE for at least
2 seconds.
Area number "2" flashes in the display.
3
Press TIME SET
+
or - repeatedly to
select the number as follows:
Advertisement
