Table of Contents
Advertisement
nearby before refueling.
If any fuel spillage occurs during refueling, use a dry rag to wipe up spills
before turning the engine back on.
After refueling, screw the fuel cap back tightly onto the fuel tank and then
carry the hedge-trimmer to a spot three meter or more away from where it
was refueled before turning on the engine.
Things to check before using your hedge-trimmer
IMPORTANT
and whether or not there is any obstacle which might get in the way while
working, and remove any obstacle which can be cleared away.
Keep bystanders and animals out of the working area whose diameter is 15
meters.When work is to be performed simultaneously by two or more
persons
always check for the presence and location of others so as to
maintain a distance betweeh each person sufficient to ensure safety .
Before starting, please inspect the machine
tank ,blade ,and machine are in good condition ..Be especially carefully to
check that there is nothing wrong with the blades or with the joints by which
the blades are attached to the hedge-trimmer.
When the blade wear seriously and clutch structure have something wrong,
please stop quickly for mending.
Make sure that the handle and protective cover are in good condition.
Notes on starting the engine
While starting the engine make sure the safety of the around.
The product is equipped with a centrifugal clutch; the blade don't rotate in a
state of idling.when staring the engine,place the produce onto the ground in a
flat clear area.
WARNING
speed position when starting the engine.
Notes of the operation
Grip the handles firmly with both hands when the engine
is running,Always be sure to maintain a steady,even
posture while working.
OWNER'S MANUAL OF SL700D/SLP600D
Before beginning work, look around carefully to get a
feel for the shape of the land, or grass to be trimmed,
Please don't put the throttle in the high
6
make sure that the fuel
Advertisement
Table of Contents
