Midland GP2660HC User Manual page 13

The starting way of engine
DANGER
CAUTTON
IMPORTANT
1. Press the primer pump until the fuel go back to the
fuel.
SUPPLEMENT
Move at least 3m away form fueling site before staring
engine.Staring at the fueling side will result in accident.
Don't start the engine indoors or in poorly ventilated area.
The gas of the engine contains carbon monoxide which is
dangerous to your health.
Inspect the entire unit for loose fasteners and fuel leakage.
Make sure that the cutting attachment is properly installed
and securely fastened.
When staring the engine, place the product onto the ground
in a flat clear area and hold it firmly in place so as to
ensure that the cutting part don't contact with arry
obstacle when the engine starts.
The cutting attachrnent begins to rotale as soon as the
engine is started by putting the throttle to the start position.
Remove any obstacle before beginning work.
After starting the engine,check to make sure that the cutting
attachrent stops rotating when the throttle is move fully
back to its oniginal position.If not stop the engine and
check the throttle cable and the adjusting bott of the
carburetor.
Please remove the blade cover before starting
This is not necessary if the
engine is warm.
OWNER'S MANUAL OF SL700D/SLP600D
12