Number Buttons - Sony CDX-GT45IP Operating Instruction

I SEEK +/- buttons
CD/iPod:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
J
(front panel release) button page 5
K MODE button page 9, 10, 11
Press to: Select the radio band (FM/MW/
SW)/select the play mode of iPod.
Press and hold to: Enter/cancel the passenger
control.
L Receptor for the card remote
commander
M RESET button (located behind the front
panel) page 4
N EQ3 (equalizer) button page 12
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
O BTM button page 9
To start the BTM function (press and hold).
P Frequency select switch (located on the
bottom of the unit)
See "Frequency select switch" in the
supplied installation/connections manual.
Q Number buttons
CD/iPod:
(1)/(2): ALBM -/+ (during MP3/WMA
playback)
To skip albums (press); skip albums
continuously (press and hold).
(3): REP page 9, 11
(4): SHUF page 9, 11
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
R DSPL (display)/SCRL (scroll) button
page 9, 10, 11
To change display items (press); scroll the
display item (press and hold).
S AUX input jack page 13
To connect a portable audio device.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
w; < (.)/, (>) buttons
To control CD/radio/iPod, the same as
(SEEK) -/+ on the unit.
Setup, sound setting, etc., can be operated by
< ,.
wa DSPL (display) button page 9, 10, 11
To change display items.
ws VOL (volume) +/- button
To adjust volume.
wd ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wf SEL (select) button
The same as the select button on the unit.
wg M (+)/m (-) buttons
To control CD/iPod, the same as (1)/(2)
(ALBM -/+) on the unit.
Setup, sound setting, etc., can be operated by
M m.
wh SCRL (scroll) button
To scroll the display item.
wj Number buttons
To receive stored stations (press); store
stations (press and hold).
* In the case of a CD changer being connected; when
(SOURCE) is pressed, "CD" and the unit number will
appear in the display. Furthermore, if (MODE) is
pressed, you can switch the changer.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
7