Polarized Plug Instructions; Short Cord Instructions - Kalorik USK HA 31535 Operating Instructions Manual

Fax +32 2 359 95 50

POLARIZED PLUG INSTRUCTIONS

This appliances is equipped with a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this plug will fit
into the polarized outlet only one way. If the plug does not properly
fit into the outlet at first, reverse it. If it still does not fit, contact a
competent qualified electrician. Do not attempt to modify the plug in
any way.

SHORT CORD INSTRUCTIONS

A short power supply cord is provided to reduce the hazards resulting
from becoming entangled in, or tripping over a longer cord.
Extension cords may be used if care is exercised in their use.
The electrical rating of the extension cord should be at least
•
that of the appliance. If the electrical rating of the extension
cord is too low, it could overheat and burn.
The resulting extended cord should be arranged so that it will
•
not drape over the counter top or tabletop where it can be
pulled on by children or tripped over.
IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the
•
standard operating times (see "ASSEMBLY/OPERATION"). If the
operation is not finished during the specified period, shut off the
machine and let it cool for 10 minutes before next round of
operation. If more than 5 rounds are required, let the machine
cool for 90 minutes at room temperature before the next round.
This can lengthen the lifespan of the machine. Failure to follow
this instruction carefully may result in damage to the motor.
To avoid spillage or overflow, please process food according to
•
the specified maximum capacity:
40 Oz. / 1200ML capacity for dry food
66 Fl.Oz. / 2000ML capacity for liquids
Copies of the I/B. Please reproduce them without any
changes except under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
4
Assembly page 4/44
special instruction from Team
Print only
USK HA 31535 / 33143 - 111026