JVC KW-V40BT Instruction Manual page 28

BLUETOOTH BLUETOOTH
Adjusting the volume of calls/earpiece/
microphone
While talking...
• You can adjust the volume level between –20 to
+8 (initial: 0).
• This adjustment does not affect the volume level
of the other sources.
• Use the monitor panel to adjust the call/earpiece
volume. (Page 6 )
Switching between handsfree mode
and phone mode
While talking...
Each time you press the button, the talking method
is switched ( : handsfree mode /
mode).
28
Notifying SMS reception
If the mobile phone is compatible with SMS (Short
Message Service), the unit tells you a message has
been received. (Page 32)
• To read a received message, operate the mobile
phone after stopping the car in a safe place.
– You cannot read, edit, or send a message
through the unit.
• For some mobile phones, the notification message
may not be shown even if the SMS function is
supported.
Reducing noise/adjusting the echo
cancel level
While talking...
• To reduce the noise: Select [On] for <NR/EC>.
• To adjust the echo volume (between 1 to 10,
initial: 4): Press [EC –]/[EC +] .
• To adjust the noise reduction volume (between
−5 to −20, initial: −7) : Press [NR –]/[NR +] .
: phone
Making a call
1
Display the phone control screen.
On the source control screen:
On the <HOME > screen:
On the monitor panel:
KW-V40BT KW-V20BT
2
Select a method to make a call.
1
2
3
4
1 From the preset list/phone book/call lists
2 Direct number entry
3 Voice dialing
4 Phone number list (Page 29)