Representation; Touch Screen Calibration; Auto Mode - Navigon MN4 User Manual

5.1.4

Representation

Representation
5.1.5

Touch screen calibration

Touchscreen
calibration
5.1.6

Auto mode

Auto mode
Appendix
On the R
EPRESENTATION
modifications:
Element
Skin
Brightness day
Brightness night
If you think that the touch screen does not perceive contact
positions correctly, MobileNavigator may calibrate it.
Tap the Start calibration button and follow the instructions on
the display.
On the A screen, you may effect the following
UTO MODE
modifications:
Element
Autozoom
Map
screen, you may effect the following
Signification
Skins are made to personalise the user
interface of MobileNavigator.
Tap the Skin field.
Select one of the available skins and tap
OK.
Tap this entry field and select a brightness
degree (1 to 8) to adapt the brightness of
the screen to daylight conditions.
Tap this entry field and select a brightness
degree (1 to 8) to adapt the brightness of
the screen to night conditions.
Signification
Autozoom increases or reduces the scale of
the map, depending on your current speed.
Tap the Autozoom field.
Select
No autozoom if you don't want the scale
to be modified in navigation mode.
Standard autozoom if you want the scale
to be modified continuously in navigation
mode.
Low autozoom if you want to increase the
scale quicker than with normal autozoom.
High autozoom if you want to reduce the
scale quicker than with normal autozoom.
Make your choice and tap OK.
Tap this button to orientate the map by
default to the north (Yes) or in driving
direction (No).
User's manual BLUE Edition
- 68 -