Configuration Of Mobilenavigator; Map Information - Navigon MN4 User Manual

5.1

Configuration of MobileNavigator

Configuration
5.1.1

Map information

Info on the map
Appendix
In MobileNavigator, you may modify the following settings:
Map information, see below.
Route information, see page 67.
Volume, see page 67.
Representation, see page 68, see page 69.
Touch screen calibration, see page 68
Auto mode, see page 68.
Speed profile, see page 69.
Itinerary, see page 69.
Time zone, see page 69.
Itinerary, see page 69.
Format, see page 69.
Home address, see page 70.
Radio-Mute, see page 70
On the main screen, tap the Settings button to configure
MobileNavigator.
On the S screen, tap the Save button to apply your
ETTINGS
modifications if you have made some.
On the I
NFO ON THE MAP
modifications:
Element
Info bar
Special
destinations
Street names
screen, you may effect the following
Signification
The Info bar at the bottom of the map
displays the the compass, the current
height above sea level, and the current
speed.
Tap the respective command button to
display (Yes) or not (No) the Info bar.
Tap the respective command button to
display (Yes) or not (No) Special
destinations on the map.
Tap the respective command button to
display (Yes) or not (No) Street names on
the map.
User's manual BLUE Edition
- 66 -