Honda 2015 CB300FA Owner's Manual page 88

15 CB300FA (U)-32K33K000.book 85 ページ ２０１４年１０月９日 木曜日 午後１時４分
3. Adjust the drive chain.
4. Install and tighten the rear axle nut.
Torque: 88 N·m (9.0 kgf·m, 65 lbf·ft).
5. After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
P. 63
2
Tyre Puncture u Removing Wheels
85