15 CB300FA (U)-32K33K000.book 55 ページ 2014年10月9日 木曜日 午後1時4分
1. If the engine is cold, idle the engine for 3
to 5 minutes.
2. Turn the ignition switch off, stop the
engine and wait for 2 to 3 minutes.
3. Park on a firm, level surface and lower
the side stand.
4. Place a drain pan under the drain bolt.
5. Remove the oil fill cap, drain bolt, and
sealing washer to drain the oil.
Drain bolt
Engine Oil
6. Remove the oil filter cover, oil filter,
spring and gasket by removing the oil
filter cover bolts and let the remaining oil
drain out.
Oil filter cover
Oil filter cover bolts
Sealing washer
u
Changing Engine Oil & Filter
u
Discard the oil and oil filter at an
approved recycling centre.
Spring
Gasket
Oil filter
55