Honda 2015 CB300FA Owner's Manual page 59

15 CB300FA (U)-32K33K000.book 56 ページ ２０１４年１０月９日 木曜日 午後１時４分
Engine Oil u Changing Engine Oil & Filter
7. Install the new oil filter with the OUT-
SIDE mark facing out.
8. Install the oil filter spring into the oil filter
cover, and then install the new gasket
and oil filter cover by tightening the oil
filter cover bolts.
Torque: 12 N·m (1.2 kgf·m, 9 lbf·ft).
9. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft).
10. Fill the crankcase with the recommended
oil ( P. 41) and install the oil fill cap.
2
Required oil
When changing oil &
engine oil filter:
1.5 litres (1.6 US qt, 1.3 Imp qt)
When changing oil only:
1.4 litres (1.5 US qt, 1.2 Imp qt)
56
11. Check the oil level.
2
12. Check that there are no oil leaks.
NOTICE
Improper installation of the oil filter can result in serious
damage to the engine.
Oil filter cover Spring
Gasket
Oil filter cover bolts
P. 53
Oil filter
OUT-SIDE mark