Advertisement
B.
Connect the other end of the
cable to the computer or other
device that you want to add to
the network.
C.
Connect the power cord to the
Power port.
D.
Plug the other end into an
electrical outlet.
NOTE:
of your home, Linksys recommends that you plug the Adapter
directly into an electrical outlet. The Adapter has its own power
filter to help protect against surges.
E.
The Power, Ethernet, and
Powerline LEDs light up.
NOTE:
LED
the connection between
the Adapter and your
powerline network has
been established.
Because the Adapter sends data over the power lines
The Powerline
indicates that
Hardware installation is complete.
Connect Other End of Network Cable
Connect Power Cord
Plug Power into Outlet
Power, Ethernet, and Powerline LEDs
Light Up
Advertisement
