National Instruments PXI NI PXI-1052 User Manual page 51

Pinouts
PXI signals are shown in bold.
Note
© National Instruments Corporation
This appendix describes the P1 and P2 connector pinouts for the PXI-1052
backplane.
Table B-1 shows the P1 (J1) connector pinout for the System
Controller slot.
Table B-2 shows the P2 (J2) connector pinout for the System
Controller slot.
Table B-3 shows the P1 (J1) connector pinout for the star trigger slot.
Table B-4 shows the P2 (J2) connector pinout for the star trigger slot.
Table B-5 shows the P1 (J1) connector pinout for the peripheral slots.
Table B-6 shows the P2 (J2) connector pinout for the peripheral slots.
For more detailed information, refer to the PXI Hardware Specification,
Revision 2.1. Contact the PXI Systems Alliance for a copy of the
specification or visit
www.pxisa.org
.
B-1
B
NI PXI-1052 User Manual