Electromagnetic Compatibility; Online Product Certification - National Instruments Relay Module SCC-RLY01 User Manual

Safety
Note For UL and other safety certifications, refer to the product label or the Online
Product Certification section.

Electromagnetic Compatibility

For the standards applied to assess the EMC of this product, refer to the Online
Note
Product Certification section.
Note For EMC compliance, operate this product according to the documentation.
For EMC compliance, operate this device with shielded cables.
Note
CE Compliance

Online Product Certification

© National Instruments Corporation
This product meets the requirements of the following standards of safety
for electrical equipment for measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
• EN 61326 (IEC 61326): Class A emissions; Basic immunity
• EN 55011 (CISPR 11): Group 1, Class A emissions
• AS/NZS CISPR 11: Group 1, Class A emissions
• FCC 47 CFR Part 15B: Class A emissions
• ICES-001: Class A emissions
This product meets the essential requirements of applicable European
Directives as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Refer to the product Declaration of Conformity (DoC) for additional
regulatory compliance information. To obtain product certifications and
the DoC for this product, visit
number or product line, and click the appropriate link in the Certification
column.
ni.com/certification
7
, search by model
SCC-RLY01 Relay Module User Guide