Cables And Optional Equipment - National Instruments NI 783xR User Manual

Cables and Optional Equipment

Cable
SH68-C68-S
SHC68-68-RMIO
© National Instruments Corporation
National Instruments offers a variety of products you can use with R Series
devices, including cables, connector blocks, and other accessories, as
shown in Table 1-2.
Table 1-2. Cables and Accessories
Cable Description
Shielded 68-pin VHDCI
male connector to female
0.050 series D-type
connector. The cable is
constructed with 34 twisted
wire pairs and an overall
shield.
Shielded 68-pin VHDCI
male connector to female
0.050 series D-type
connector. The cable is
constructed with individually
shielded twisted-pairs for the
analog input channels plus an
additional shield around all
the analog signals. This cable
provides superior noise
immunity on the MIO
connector.
NI 783xR
Connector
MIO or DIO
MIO only
1-7
Chapter 1 Introduction
Accessories
Connects to the following
standard 68-pin screw
terminal blocks:
• SCB-68
• CB-68LP
• CB-68LPR
• TBX-68
Connects to the following
standard 68-pin screw
terminal blocks:
• SCB-68
• CB-68LP
• CB-68LPR
• TBX-68
NI 783xR User Manual