Pioneer PRV-LX10 Service Manual page 151

5
Program installation
1 Hold the [ENTER] button on the front panel pressed and
press the [STANDBY/ON] button to start up the unit.
2 "PGM-INSTALL" is displayed on the FL display, and the
tray for the DVD drive opens.
Display on the monitor screen:
----------------------------------------
- PRV-LX10 Program Installer -
----------------------------------------
PLEASE INSERT INSTALLATION CD IN DRIVE ONE,
THEN PRESS [ENTER] BUTTON ON FRONT PANEL
FOR 2 SECONDS TO BEGIN UPDATE.
>>
3 Load the program installation disc (GGV1234, Ver. 3.01) into the tray and press
the [ENTER] button on the front panel. The tray will close,
and upgrading of the version starts.
Display on the FL display:
DOWNLOAD FULL
Display on the monitor screen:
==============================
= PRV-LX10 Program Installer =
==============================
Setup Directories ...
Start Program Download ...
= Setup Drives. = --> The message changes according to the progress.
==== --> Progress bar
4 When installation is finished, the PRV-LX10's startup
display appears on the monitor screen, the tray for DVD
Drive opens, and "DOWNLOAD COMPLETED" is displayed
on the FL display. Then the unit is automatically turned off.
5 Start up the unit by pressing the [STANDBY/ON] button on
the front panel, then make sure that the version of the
program is updated, using the Debug screen (ESC + DISP).
Note: If a program whose version is older than the currently
installed one is to be installed, the following message
is displayed:
On the monitor screen:
Current Version : 1.07
Installation CD Version : 1.05
Newer version programs have already been installed.
Press appropriate front panel button for 2 seconds
followed by [ENTER] button for 2 seconds.
(1) [ UP ] Force to install
(2) [ DOWN ] Quit.
>>
• To continue the installation process, press the [UP] button
then the [ENTER] button on the front panel.
5
6
PRV-LX10
6
7
7
8
A
B
C
D
E
F
151
8