How To Check The Error Log - Pioneer PRV-LX10 Service Manual

1

7.1.5 HOW TO CHECK THE ERROR LOG

The PRV-LX10 is provided with a log file in which the data at the point when the power is turned on are stored. In the log file,
the number of times the power is turned on, time when the power is turned on and off, and error data can be checked.
A
How to check the log file
Note: • If user settings have been made, return the settings to the original ones after servicing.
• Please copy a Log file beforehand. (Refer to " [9]: Copying the Log file of 2-6 Clearing data on comulative power-on
time, etc." on page 119.
1) Perform the setting for the network. (An example is shown below, but the connection is possible in a different way.)
1 Make preparations for the PC.
Make the network settings for the PC, assigning the IP address as indicated below:
IP address : 192.168.0.15
Subnet mask : 255.255.255.0
B
Gateway : 192.168.0.1
2 Turn off the PC.
3 Make the manual settings for the network of the PRV-LX10 on the Function menu (then selecting System, then Network).
IP address : 192.168.0.16
Subnet mask : 255.255.255.0
Gateway : 192.168.0.1
4 Turn off the PRV-LX10.
5 Connect the PRV-LX10 and the PC directly, using an Ethernet cross cable.
6 Turn on the PRV-LX10 and the PC.
C
2) Open the log file using a Web browser (IE, etc.).
Using the Web browser on the PC, access:
ftp://192.168.0.16
Enter the following user name and password:
User : DVDRecService
Password : DVDRecService
D
Open the "poweron.log" or "service_info.jog" file using the Web browser.
E
F
130
1
2
PRV-LX10
2
3
3
4
4