Personalizing the Quick Access Menu
178
Customizing the Menu System
You can replace the default Quick Access menu
features described on page 65 with any of the
following features.
D
Icon
Quick Access Feature
F
Find by Location recalls a Phone Book entry
by its memory location number.
T
Add Entry to Phone stores entered numbers
in the next available phone memory location.
N
Add Entry to SIM stores entered numbers in
the next available SIM card location.
e
Ring Volume displays and sets the incoming
call ring tone volume.
V
Check Signal checks the strength of the
signal from the satellite network.
Switch Memory switches one-touch dialing
Y
between the phone and SIM memories
depending on the current setting.
%
Last Call Timer displays the duration of your
last call.
Show Services displays a list of service
$
phone numbers programmed by your service
provider.
Mode Selection: This feature is not currently
supported.
To change a default quick access feature to one of
the features listed above:
E
1. Press
feature you wish to change.
2. Press and hold
features available.
M
3. Press
find the desired feature.
O
4. Press
new location. You will see
and then press
O
to access the list of
to scroll through the list until you
to store the displayed feature in the
M
to scroll to the
Completed
.