Spark Arrestor - Husky HU22511 Operator's Manual

CleaninG tHe eXHaUSt port and
MUFFler
Depending on the type of fuel used, the type and amount of
lubricant used, and/or your operating conditions, the exhaust
port and muffler may become blocked with carbon deposits.
If you notice a power loss with your gas-powered products,
you may need to remove these deposits to restore perfor-
mance. We highly recommend that only qualified service
technicians perform this service.

SPARk ARRESTOR

See Figure 15.
The spark arrestor must be cleaned or replaced every 50
hours or yearly to ensure proper performance of your product.
Spark arrestors may be in different locations depending on
the model purchased. Please contact your nearest service
dealer for the location of the spark arrestor for your model.
MaintenanCe
eMptyinG FUel tank/CarBUretor
To help prevent gum deposits in the fuel system, drain the
fuel from the tank and carburetor before storing.
 Run the generator until the fuel tank is empty.
 When the fuel has gone from the tank, close the fuel
valve.
NOTE: Consult hazardous waste management guidelines
in your area for the proper way to dispose of used fuel.
tranSportinG
 Turn engine switch OFF ( O ).
 Turn the fuel valve to the OFF position.
 Make sure engine and exhaust of unit is cool.
 Empty the fuel tank.
 Do not drop or strike unit or place under heavy objects.
Page 15 — English