Aqua Prima" Filter - Saeco Odea Giro Operation And Maintenance Manual

"AQUA PRIMA" WATER FILTER
8
10
Wait until a steady fl ow of water
comes out of the spout.
When the correct temperature is reached, the machine performs a rinse cycle of the internal circuits. A small
amount of water is dispensed; during this phase, the lights fl ash counterclockwise. Wait for this cycle to be
completed.
"AQUA PRIMA" WATER FILTER (OPTIONAL)
To improve the quality of the water you use, it is recommended to install the "Aqua Prima" fi lter. Before
using it, leave the fi lter immersed in the tank for 30 minutes.
1
Remove the "Aqua Prima" fi lter
from its packaging. Enter the
date of the current month.
4
Place a container beneath the steam
spout. Dispense the water in the
tank using the hot water function
(see page 13).
11
Turn the knob until it is in the
rest position ( ).
2
Insert the fi lter in the empty tank.
The reference mark and the
groove must match. Push fi rmly
until it is completely inserted.
5
Fill the tank again with fresh
drinking water.
The machine is ready for use.
12
Press the water button again.
The indicator light turns off.
Remove the container. The
machine is ready for use.
3
Fill the tank with fresh water. Let
the fi lter soak for 30 minutes.
After 30 minutes discard the
water in the tank and refi ll with
fresh water.