Wi-Fi Protected Setup (Wps) - Canon WFT-E6 Operational Manual

Wi-Fi Protected Setup (WPS)

Wi-Fi Protected Setup (WPS) is the easiest way to connect to a Wi-Fi access point. You can do
so simply by pushing a button (if the access point (wireless router) you want to connect to has a
WPS button) or using a PIN code issued by the camera.
Wireless Routers with a WPS Button
12
1
Press and hold the WPS button on the
wireless router.
The length of time required to hold down the WPS
button depends on the wireless router. Refer to the
instruction manual of your wireless router and
make sure the wireless router's WPS function is
activated.
2
Within 2 minutes, press SET on the
camera.
While [Connecting] appears on the screen, you
can press SET or the CANCEL button to cancel
the operation.
After the connection is correctly established,
continue with the procedure to configure the IP
address assignment (A 16).