Starting Browser Remote - Canon WFT-E6 Operational Manual

Starting Browser Remote

After establishing a connection between the camera and a Wi-Fi enabled device
the Browser Remote application on the device's Web browser
manual of the Wi-Fi enabled device used.
1
For details about compatible devices, operating systems, Web browsers, etc. please visit your local Canon
Web site.
2
A Web browser is required that supports JavaScript and is enabled to accept cookies.
Preparations on the Camera
Preparations on the Wi-Fi Enabled Device
24
1
Set the camera to
the [Browser Remote] submenu.
[w System Setup] > [Network Settings] > [Browser
Remote]
2
Select [Activate], select [On] and then
press SET.
The current connection settings will be displayed
on the screen. You will need to select the
displayed SSID (network name) and enter the
displayed password in the device's Wi-Fi settings
(step 4), and the URL in the Web browser's
address bar (step 6) so write them down if
necessary.
The actual password will be displayed only for the
default connection settings.
3
Press SET to activate the Camera
Access Point connection and close the
menu.
will appear on the top of the screen. When the
icon turns white, the camera is ready to accept
commands from the Browser Remote application.
4
Connect the device to the camera's
access point.
Use the SSID and password from step 2 to change
the device's Wi-Fi settings.
1
, you can start
2
. Refer also to the instruction
mode and open