Recording From Connected Equipment; Playback; Playing The Recorded Programme/Dvd - Sony RDR-GX350 Service Manual

QQ
3 7 63 1515 0
3
Select the timer setting you want to
change using M/m, and press the
green button ("Edit").
4
In the left column, select an item
using the red button ("Back") or the
green button ("Next"), and adjust
using the number buttons or </M/m/
,.
You can change the date, start time, stop
time, programme position, or input
source.
The cursor moves to the right column.
5
Press the corresponding colour button
repeatedly to change settings.
• Yellow button ("Destination"): Sets the
recording destination. If there is not
enough available DVD disc space for
the recording, the recorder
automatically records the programme
to the HDD even if you select "DVD"
(Recovery Recording). When you set a
daily or weekly timer, "HDDr" allows
you to replace the previous timer
recording with the new one
automatically (HDD only).
• Green button ("Frequency"): Selects
the recording pattern.
• Red button ("Quality"): Selects the
recording mode (page 51).
6
Press , to display "Timing."
7
Press the green button ("Timing")
repeatedly to select the duration time
or to set the VPS/PDC function.
See "About the VPS/PDC function"
below.
• If you want to record to a particular
HDD genre, press the yellow button
("Genre") repeatedly.
TE
L 13942296513
58

Playback

Playing the Recorded
Programme/DVD
HDD + RW -RW -RW +
R
VR
Video
*
-R
-R DVD VCD DATA DVD
VR
Video
*
DATA CD
* DivX video file only
HDD DVD
Number
buttons
CLEAR
AUDIO
ANGLE
SUBTITLE
PLAY MODE
SYSTEM
TITLE LIST/
MENU
TOP MENU
MENU
</M/m/,,
ENTER
DISPLAY
/
>
.
H/X/x
1
Press HDD or DVD.
• If you select DVD, insert a disc (see "1.
Inserting a Disc" on page 31).
• If you insert a DVD VIDEO, VIDEO
CD, DATA DVD or DATA CD, press
H. Playback starts.
2
Press TITLE LIST.
For details about the Title List, see "3.
Playing the Recorded Programme (Title
List)" on page 33.
www
Example: HDD
.
60
http://www.xiaoyu163.com
b
Notes
• The new settings become effective when you exit
the GUIDE Plus+ system.
• When you set the recording destination to
"HDDr," the previous timer recording will be
replaced with the new one even if you have not
watched it.
About the VPS/PDC function
VPS/PDC signals are transmitted with TV
programmes in some broadcast systems.
These signals ensure that timer recordings are
made regardless of any broadcast delays,
early starts, or broadcast interruptions.
To use the VPS/PDC function
Select "VPS / PDC" in step 7 above.
When you turn on this function, the recorder
starts scanning the channels before the timer
recording starts.
b
Note
The recording mode cannot be set to "AUTO"
when "VPS/PDC" is set to "On."
Cancelling timer settings
1
Press GUIDE.
2
Select "Schedule" in the Menu bar.
The SCHEDULE list appears.
3
Select the timer setting you want to
cancel using M/m, and press the red
button ("Delete").
To close the SCHEDULE list
Press GUIDE.
When the timer settings overlap
• The programme that starts first has priority
and the entire programme is recorded.
• After finishing the previous recording, the
other recording starts with several tens-of-
second's delay (when the end-time of one
recording and the start-time of another are
the same).
• When the recordings start at the same time,
only one of them will be recorded. Cancel
the timer setting for the programme that you
are not going to record.
b
Note
When "VPS / PDC" is set for one or more timer
recordings, the start times may change in the event
of a broadcast delay or early start.
3
Select a title using M/m, and press
ENTER.
Playback starts from the selected title.
To use the DVD's Menu
When you play a DVD VIDEO, or a finalised
DVD+RW, DVD-RW (Video mode),
DVD+R, or DVD-R (Video mode), you can
display the disc's menu by pressing TOP
MENU or MENU.
b
Note
The H button is not available in the disc's menu.
To play VIDEO CDs/Super VIDEO CDs with
PBC functions
PBC (Playback Control) allows you to play
VIDEO CDs/Super VIDEO CDs
interactively using the menu on your TV
screen.
When you start playing a VIDEO CD/Super
VIDEO CD with PBC functions, the menu
appears.
Select an item using the number buttons, and
press ENTER. Then, follow the instructions
in the menu (press H when "Press
SELECT" appears).
b
Note
Some playback options such as search, repeat play
or programme play cannot be played with PBC
function. To play with playback options, start
playback without PBC functions using the Title
List.
To change the angles
If various angles (multi-angles) for a scene
are recorded on the disc, " " appears on
the screen. Press ANGLE during playback.
To switch the angle mark indicator to off, set
"Angle Indicator" to "Off" in the "Playback"
setup (page 124).
To stop playback
Press x.
To playback quickly with sound (Scan
x ao
Audio)
y
When you press M during playback, you
can play quickly with dialogue or sound
(except for VIDEO CDs/Super VIDEO
i
CDs).
No sound is output when you press M two
or more times to change search speed.
http://www.xiaoyu163.com
8
Recording from
Connected Equipment
+
HDD RW -RW -RW
VR
Video
-R -R
VR
Video
You can record from a connected VCR or
similar device. To connect a VCR or similar
device, see "Connecting a VCR or Similar
Device" on page 26. Use the DV IN jack on
the front panel if the equipment has a DV
output jack (i.LINK jack).
HDD
z REC
x REC
STOP
1
Press HDD or DVD.
If you select DVD, insert a recordable
DVD (see "1. Inserting a Disc" on
page 31).
2
Press INPUT to select an input source
according to the connection you
made.
The front panel display changes as
follows:
programme position
Q Q
3 6 7 1 3
To display the registration code for this
recorder
Select "Registration Code" of "DivX" in the
"Options" setup (page 128).
To resume playback from the point where
you stopped (Resume Play)
When you press H again after you stop
playback, the recorder resumes playback
from the point where you pressed x.
To start from the beginning, press x again,
and press H. Playback starts from the
beginning of the title/track/scene.
The point where you stopped playing is
cleared when:
– you open the disc tray (except HDD).
– you play another title (except HDD).
– you switch the Title List to Original or
Playlist (DVD-RWs/DVD-Rs in VR mode
only).
– you edit the title after stopping playback.
– you change the settings on the recorder.
– you make a recording (except HDD/DVD-
RWs/DVD-Rs in VR mode).
– you disconnect the mains lead.
b
Notes
• You cannot resume playback during TV Pause.
• Resume Play is not available for Super VIDEO
CDs.
To play restricted DVDs (Parental Control)
If you play a restricted DVD, the display for
entering your password appears on your TV
screen.
Enter your four-digit password using the
number buttons, and press ENTER.
The recorder starts playback.
To register or change the password, see
"Parental Control (DVD VIDEO only)" on
page 123.
u163
.
1-14
2 9 9 4 2 8
3
Select the desired audio signal when
recording a bilingual programme to
the HDD or DVD-RWs/DVD-Rs (Video
mode).
Set "External Audio" to "Bilingual" and
+
R
"Bilingual Recording" to "A/L" or "B/R"
in the "Audio In" setup (page 116).
4
Press REC MODE repeatedly to select
the recording mode.
For details about the recording mode, see
page 51.
5
Insert the source tape into the
connected equipment and set to
playback pause.
6
DVD Press z REC.
This recorder starts recording.
7
INPUT
Press the pause (or play) button on the
connected equipment to cancel the
playback pause status.
The connected equipment starts playback
and the playback image is recorded by
this recorder.
To stop recording, press x REC STOP
on this recorder.
If you connect a digital video camera with
REC MODE
a DV IN jack
See "DV Camcorder Dubbing" on page 84
for an explanation of how to record from the
DV IN jack.
z Hint
You can adjust the settings for the recording picture
before recording. See "Adjusting the recording
picture quality" on page 56.
b
Notes
• When recording a video game image, the screen
may not be clear.
• You cannot select "Bilingual" in step 3 if "HDD
Recording Format" is set to "Video Mode On" in
the "Recording" setup (page 122), or if you select
PCM as recording mode.
• You cannot select "L1" in step 2 if "LINE 1 In" is
set to "Decoder" in the "Video In/Out" setup
(page 115).
1 5 0 5 8 2 9 9 4
To lock the recorder (Child Lock)
You can lock all of the buttons on the
recorder so that the settings are not cancelled
by mistake.
When the recorder is turned off, hold down x
on the recorder until "LOCKED" appears in
the front panel display. The recorder does not
work except for timer recordings while the
Child Lock is set.
To unlock the recorder, hold down x on the
recorder until "UNLOCKED" appears in the
front panel display.
One-Touch Play (for SCART/HDMI
connections only)
Press H. With one touch of the H button,
the recorder and your TV automatically turn
on and the TV's input is switched to the
recorder. Playback starts automatically.
z Hint
You can also use the H button in step 3 (page 60)
to start playback.
b
Note
When using the HDMI connection, there may be a
delay, before the playback picture appears on the
TV screen, and the beginning portion of the
playback picture may not be displayed.
m
co
,continued
9 9
2 8 9 9
59
61