Dv Service Mode - Sony RDR-GX350 Service Manual

QQ
3 7 63 1515 0

6-2-12. DV Service Mode

1. DV debug
1) Turn of the main power ON.
2) On the screen after exiting all menu screens, press "ESC" on the service remote controller.
3) Press "DISP".
4) Press "3".
(DV/1394) InitDV : OK InitVE : OK AV : 02 DV : 01
1
[Recorder] GUID : 00E0360006100001 IRM
2
iPCR : C03F0000 oPCR : 0000007A
3
[DV] GUID : 0080880303480E96
4
VN : VICTOR MN : GR-D50K
5
TM : C3 TS : 75 CT : 32 WP : 01 PS : FF OS : 00
6
CA : A000002020 CV : FF MD : VTR
7
[DVdecode : Yes]
8
TC : 00h20m35s
9
ASPECT : 4 : 3
0
SF : 32KHz QU : 12bit AMODE : 4) Stereo
qa
No. Item
1
InitDV Whether the initialization of UPD72893B (1394 LINK and DV
codec IC) has been completed (OK) or not (NG).
InitVE Whether the initialization of ADV7172 (Video Encoder for DV
specific) has been completed (OK) or not (NG).
AV Number of AV devices recognizing connection
DV Number of DV devices recognizing connection
2
GUID GUID set in ConfigROM of the unit.
iPCR iPCR value of the unit
3
TE
L 13942296513
oPCR oPCR value of the unit
GUID GUID set in ConfigROM of the connected DV device.
4
VN Vendor name set in ConfigROM of the connected DV device.
5
MN Model name set in ConfigROM of the connected DV device.
TM Transport Mode data obtained from the DV device.
6
TS Transport State data obtained from the DV device.
CT Cassette Type data obtained from the DV device.
WP Write-protection data obtained from the DV device.
PS Power-state data obtained from the DV device.
OS Output signal mode data obtained from the DV device.
CA Connect AV data obtained from the DV device.
7
CV Camera/Vtr mode data obtained from the DV device.
MD DV device mode
[DVdecode: Whether Yes (in the process of requesting DV input) or No is
8
XXX] indicated in XXX.
LineSys Input Line System setting
TC Time-code data of the DVdecode Stream, or response data of the
9
Time Code command
RD Rec Date of DVdecode Stream
RT Rec Time of DVdecode Stream
ASPECT Aspect Ratio of DVdecode Stream
0
CGMS CGMS of DVdecode Stream (from left to right, CGMS data of
bits 5-4: Audio ch 2, bits 3-2: Audio ch 1, and bits 1-0: Video)
www
APSTB APS trigger bit of DV decode stream
DEC With/without DVdecode stream input
.
SF Sampling Frequency of DVdecode Stream
qa
QU QUANTIZATION of DVdecode Stream
AMODE AUDIO MODE of DVdecode Stream
5) Press "ESC". (Returns to the original screen)
http://www.xiaoyu163.com
LineSys : 525-60
RD : 02/02/05 RT : 10h34m50s
CGMS : 000000 APSTB : 00 DEC : 525-60
Description
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
* Used when an error exists in connection with the DV equipment.
Boldface alphanumerics
Nonboldface alphanumerics : Variable indications
If NG is displayed, it is considered the communication failure
to UPD72893B.
If NG is displayed, it is considered the communication failure
to ADV7172.
Identification number of AV devices including D-VHS, Digital
Tuner, etc other than DV devices.
If the number does not become 01 even if a DV device is
connected, identification of that device fails.
GUlD : Global Unique ID (Specific ID for DV devices)
If the unit is ROOT (IRM), IRM is displayed at the side position of GUID display.
Q Q
3 6 7 1 3 1 5
Data are displayed only if one DV device is identified.
If the connected DV device is ROOT (IRM), IRM is
displayed at the side position of GUlD display.
Data are displayed only if one DV device is identified.
(Depending on the device, the vendor name may not be set in ConfigROM.)
Data are displayed only if one DV device is identified.
(Depending on the device, the model name may not be set in ConfigROM.)
Data are displayed only if one DV device is identified.
Data are displayed only if one DV device is identified.
Camera or VTR is displayed only if one DV device is
identified.
Normally, Yes is indicated only when CH is set to DV.
Stream time-code data are obtained when the tape is played in
forward direction. Otherwise, time-code data are obtained
through an AV/C command.
*CGMS (Copy Generation Management System):
The two-digit codes added to broadcast programs represent the
following:
00: Copy freely, 10: Once copy, 11 : Never copy
co
With input: Signal type (525-60, 625-50, 1125-60, 1250-50, or
Invalid) is indicated, Without input: "No" is indicated.
.
If SF is 44 kHz, it is considered that 44.1-kHz audio is input,
and sound is muted on the unit.
6-17
9 4 2 8
: Fixed indications
Remarks
0 5 8 2 9 9 4 2 8
m
9 9
9 9