Printing Jpeg Image Files; Settings And Adjustments; Disc Settings (Disc Setup) - Sony RDR-GX350 Service Manual

QQ
3 7 63 1515 0
• "Rename Album": Changes the
selected album name (page 37).
• "Protect Album Contents": Protects all
JPEG image files in the selected album.
• "Cancel Protection": Cancels
protection of all JPEG image files in the
selected album.
"Copy to DVD": Copies the selected
album or JPEG image file to a DVD
(page 100).
"Multi-Mode": Selects multiple albums
or JPEG image files to edit.
"Copy all to HDD": Copies all the
albums and JPEG image files to the HDD
(page 98).
"Copy to HDD": Copies the selected
album or JPEG image file to the HDD
(page 98).
"File Options"
• "Erase": Erases the selected JPEG
image file.
• "Copy": Copies the selected JPEG
image file (page 99).
• "Rename File": Changes the selected
JPEG image file name (page 37).
• "Protect": Protects the selected JPEG
image file. Select again to cancel the
protection.
"Print": Prints the selected JPEG image
file (page 106).
"Detailed Information": Displays the
detailed information for the selected
JPEG image file (page 104).
"Single-Mode": Cancels "Multi-Mode."
TE
L 13942296513
106

Settings and Adjustments

Disc Settings (Disc
Setup)
The "Disc Setup" setup allows you to adjust
DVD related settings.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "Disc Setup," and press
ENTER.
The "Disc Setup" setup appears with the
following options. The default settings
are underlined.
Basic
Input Disc Name
You can label a disc.
For details, see page 38.
Protect Disc
You can protect a disc against erasure.
For details, see page 39.
Format DVD-RW (DVD-RW only)
The recorder automatically starts formatting
in VR mode or Video mode, whichever is
selected below, when a new, unformatted
DVD-RW is inserted.
VR Mode
Automatically formats the disc
www
in VR mode.
Video Automatically formats the disc
Mode in Video mode.
Format
You can manually re-format a DVD+RW,
.
DVD-RW, or DVD-R disc to make a blank
disc.
For details, see page 42.
108
http://www.xiaoyu163.com
Printing JPEG Image
Files
You can print JPEG image files on the HDD
or connected USB device by connecting a
PictBridge-compatible printer to the USB
jack on the recorder.
Refer to the instructions supplied with the
printer.
SYSTEM
MENU
</M/m/,,
ENTER
1
Connect a PictBridge-compatible
printer to the USB jack on the
recorder.
DVD recorder
to USB jack
PictBridge-compatible
printer
Finalise
Finalises a disc to play it on other DVD
equipment.
For details, see page 40.
Optimise HDD
As you record, erase and edit recordings
repeatedly, the HDD file system gradually
becomes fragmented. To 'clean up' all the
fragmented files, optimise the HDD
periodically. When the HDD needs
optimising, a message recommending
optimisation will appear automatically.
1
Select "Optimise HDD" in "Disc Setup,"
and press ENTER.
2
Select "Start," and press ENTER.
A progress bar appears and the
optimisation starts.
To cancel optimisation, press ENTER.
The HDD will be partly optimised.
b
Notes
• It will take about eight hours to optimise the
HDD. During optimisation, other operations,
such as recording or playback, cannot be
performed.
• You cannot optimise the HDD when the HDD
disc space is insufficient for optimising. Erase
titles to open up disc space (page 72).
Format HDD.
You can format the HDD and resolve the
problem when the hard disk error occurred.
"Format HDD." can be selected only when
the hard disk needs formatting. Note that all
of the recorded content on the HDD will be
erased.
1
Select "Format HDD." in "Disc Setup,"
and press ENTER.
2
Select "Start," and press ENTER.
x ao
y
i
http://www.xiaoyu163.com
8
2
Connect the USB device to the USB
jack on the recorder.
When printing JPEG image files on the
HDD, skip this step.
3
Press SYSTEM MENU.
The System Menu appears.
4
Select "Photo Album," and press
ENTER.
The "Photo Album" menu appears.
5
Select the item, and press ENTER.
To print JPEG image files on the HDD,
select "View/Edit Photos on the HDD."
To print JPEG image files from the
connected USB device, select "View
Photos on a USB Device."
The "Photo Album" list appears.
6
Select an album, and press ENTER.
7
Select a file using M/m, and press
,.
The sub-menu appears.
8
Select the item, and press ENTER.
To print two or more files, select "Multi-
Mode."
To print the file selected in step 7 only,
go to step 12.
9
Select a file, and press ENTER.
A check mark appears in the check box
by the selected item.
• To clear the check mark, press ENTER
again.
• To clear all check marks, select
"Single-Mode."
10
Repeat step 9 to select all files you
want to print.
11
Press ,.
The sub-menu appears.
12
Select "Print," and press ENTER.
Q Q
3 6 7 1 3
The display asks for confirmation.
Recorder Settings
(Basic)
The "Basic" setup helps you to make clock
and other recorder related settings.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "Initial Setup," and press
ENTER.
3
Select "Basic," and press ENTER.
The "Basic" setup appears with the
following options. The default settings
are underlined.
To turn off the display, press SYSTEM
MENU repeatedly.
Clock Setting
Auto (Auto Clock Set)
Turns on the Auto Clock Set function when a
programme position in your local area
broadcasts a time signal.
1
Select "Clock Setting" in "Basic," and
press ENTER.
2
Select "Auto," and press ENTER.
u163
3 Press </, repeatedly until the
programme position of the station that
carries a time signal appears.
.
1-26
2 9 9 4 2 8
13
Select "Start," and press ENTER.
You can set the paper size and layout.
Refer to the operating instructions
supplied with the printer.
To cancel printing
Press ENTER.
To display the connected printer
Select "Confirm Printer" of "USB" in the
"Options 2" setup (page 128).
To restart the connected USB device
Select "Restart USB Device" of "USB" in the
"Options 2" setup (page 128).
z Hint
Printing options, such as paper size or layout, differ
depending on the printer. For details, refer to the
instructions supplied with the printer.
1 5 0 5 8 2 9 9 4
4 Press m to select "Start," and press
ENTER.
• If the recorder does not receive a time
signal from any station, press
O RETURN and set the clock
manually.
• If the Auto Clock Set function did not
set the clock correctly for your local
area, try another station for the Auto
Clock Set function or set the clock
manually.
Manual (Manual Clock Set)
Set the clock manually.
1
Select "Clock Setting" in "Basic," and
press ENTER.
2
Select "Manual," and press ENTER.
3 Press </, to select the time zone for
your area, and press m.
4
Select "On" if you are now on summer
time, and press ENTER.
m
co
,continued
9 9
2 8 9 9
107
109