Sleep Mode; Specifications; Input Characteristics - National Instruments NI 9426 Operating Instructions Manual

National instruments digital input module operating instructions and specification sheet

Hide thumbs Also See for NI 9426:

Table of Contents

Sleep Mode

This module supports a low-power sleep mode. Support for sleep

mode at the system level depends on the chassis that the module is

plugged into. Refer to the chassis manual for information about

support for sleep mode. If the chassis supports sleep mode, refer to

the software help for information about enabling sleep mode. Visit

and enter

for information about

ni.com/info

cseriesdoc

C Series documentation.

Typically, when a system is in sleep mode, you cannot

communicate with the modules. In sleep mode, the system

consumes minimal power and may dissipate less heat than it does

in normal mode. Refer to the Specifications section for more

information about power consumption and thermal dissipation.

The following specifications are typical for the range –40 to 70 °C

unless otherwise noted. All voltages are relative to V

unless

sup

otherwise noted.

Number of channels.......................... 32 digital input channels

NI 9426 Operating Instructions and Specifications

Table of Contents