Troubleshooting - Russound XSource Installation Manual

Hide thumbs

Table Of Contents

Table of Contents

There are four LED's on the front panel of the

XSource

assist

This chart explains the operation of the LED's:

System Status

Yellow

LED

Booting

Ready

Factory Reset

Zone On

Firmware Update

Network Error

Blinking

General Troubleshooting

Check for firmware updates available to make sure that

your Russound product is always up to date and to take

advantage of any additional features or supporting services

that may be available.

Many issues can be resolved by power cycling the XSource

by disconnecting the power supply, waiting 15 seconds and

re-connecting the power supply.

For networking issues, resetting network gear in the home

such as the router or any switches between the XSource and

the router may also resolve any issues.

If you have the XSource configured with a static IP

address and do not remember the settings, you can reset

the XSource to DHCP by pressing and holding the rear

panel Reset button for 3 seconds. If there are any issues

reconnecting to the XSource after resetting to DHCP,

unplug the XSource from the network and re-connect it, or

try power cycling the network router to force a new DHCP

connection.

with

any