Disassembly Of Cd Mechanism Unit (Dls6C) - Panasonic SA-AKX30PH Service Manual

9.21.2. Assembly of Regulator Diode
(D5803)
Step 1 Apply grease to the Heatsink B.
Step 2 Install Regulator Diode (D5803) on SMPS P.C.B.
Caution: Ensure pins of the Regulator Diode (D5803) are
properly seated on SMPS P.C.B.
Step 3 Screw the regulator diode (D5803) to the Heatsink B.
Caution: Ensure the Regulator Diode (D5803) is tightly
screwed to the Heatsink B.
Step 4 Solder pins of the Regulator Diode (D5803) on the sol-
der side of SMPS P.C.B.
9.22. Disassembly of CD Mecha-
nism Unit (DLS6C)
• Refer to "Disassembly of Top Cabinet".
• Refer to "Disassembly of Front Panel Assembly".
• Refer to "Disassembly of D-Amp P.C.B.".
Step 1 Detach 11P Wire at the connector (CN5802) on SMPS
P.C.B..
Step 2 Remove 2 screws.
Step 3 Remove 3 screws (For PH only).
Step 3 Remove 2 screws (For PN only).
51