1. Manuals
  2. Brands
  3. Sony Manuals
  4. LCD TV
  5. Dream Machine ICF-CD555TV
  6. Service manual

Sony ICF-CD555TV Service Manual

Lcd-tv cd kitchen clock radio
Hide thumbs Also See for ICF-CD555TV:
Table of Contents

Advertisement

Quick Links

See also: Operating Instructions

SERVICE MANUAL

Ver. 1.3 2005.10
AUDIO POWER
SPECIFICATIONS
(US model only)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION
With 6–ohm loads, both channels driven from 100 –
10,000 Hz; rated 1.4 W per channel-minimum RMS
power, with no more than 10 % total harmonic
distortion in AC operation.
TV section
Television system: American TV standard/NTSC
Channel coverage:
VHF: 2–13/UHF: 14–69/CATV: 1–125
Antenna:
75-ohm external antenna terminal for VHF/UHF
Display type: Wide LCD color monitor
Size: 7 inches
System: TFT active matrix
Number of pixel: 336,960 pixels
Input: 1 video, 1 audio
CD player section
System: Compact disc digital audio system
Laser diode properties: Material: GaAlAs
Wavelength: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
Frequency response: 20 – 20,000 Hz
Wow and flutter: Below measurable limit
Sony Corporation
9-877-644-04
2005J05-1
Personal Audio Group
© 2005.10
Published by Sony Engineering Corporation
ICF-CD555TV
Model Name Using Similar Mechanism
Optical Pick-up Block Name
Optical Pick-up Name
SPECIFICATIONS
Radio section
Frequency range:
FM: 87.5 – 108 MHz
AM: 530 – 1,710 kHz
General
Time display: 12-hour system
Speaker: 77 mm (3
Power outputs:
1.8 W + 1.8 W (at 10% harmonic distortion)
Power requirements: 120 V AC, 60 Hz
Dimensions:
Approx. 400 × 104 × 323 mm (w/h/d)
× 4
(Approx. 15
3
⁄
4
projecting parts and controls
Mass: Approx. 4.2 kg (9 lb 4.2 oz)
Supplied accessories:
Mounting screws (4), Template (1),
Spacers (4), Remote commander (1)
Design and specifications are subject to change
without notice.
dB
LCD-TV CD KITCHEN CLOCK RADIO
US Model
Canadian Model
ZS-D10
KSM-900AAA
KSS-900A
inches) dia, 6 Ω
1
⁄
8
× 12
1
⁄
3
⁄
inches) incl.
8
4

Advertisement

Table of Contents
loading

Related Manuals for Sony ICF-CD555TV

Summary of Contents for Sony ICF-CD555TV

  • Page 1: Service Manual

    200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) Frequency response: 20 – 20,000 Hz Wow and flutter: Below measurable limit LCD-TV CD KITCHEN CLOCK RADIO Sony Corporation 9-877-644-04 2005J05-1 Personal Audio Group © 2005.10 Published by Sony Engineering Corporation...
  • Page 2 AND IN THE PARTS LIST ARE CRITICAL TO SAFE FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS OPERATION. REPLACE THESE COMPONENTS WITH QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT SONY PARTS WHOSE PART NUMBERS APPEAR AS DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- PUBLIÉS PAR SONY.

  • Page 3: Table Of Contents

    ICF-CD555TV SECTION 1 SERVICING NOTES TABLE OF CONTENTS NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT SERVICING NOTES ..........The laser diode in the optical pick-up block may suffer electro- static break-down because of the potential difference generated GENERAL ..............

  • Page 4: General

    ICF-CD555TV SECTION 2 This section is extracted from instruction manual. GENERAL Fe a t ure s The preset 3, CLOCK, VOLUME + and CD buttons have a tactile dot. ¥ Super Slim under the counter LCD-TV ¥ 7" wide-screen LCD Color panel display ¥...

  • Page 5: Disassembly

    ICF-CD555TV SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW 3-2. CD LID, CABINET (UPPER) 3-7. DSP CASE (REAR) (Page 5) (Page 8) 3-3. CD TRAY ASSY 3-8. TV BOARD (Page 6) (Page 8) 3-4.

  • Page 6: Cd Tray Assy

    ICF-CD555TV 3-3. CD TRAY ASSY 7 two connectors 8 terminal (CN501, CN504) 7 two connectors (CN304) 7 two connectors (CN302, CN303) (CN502, CN503) 5 flexible flat (17 core) cable (CN403) 7 connector (CN409) 6 flexible flat (16 core) cable (CN410)

  • Page 7: Optical Pick-Up Block (Ksm-900Aaa)

    ICF-CD555TV 3-5. OPTICAL PICK-UP BLOCK (KSM-900AAA) 2 OP flexible board (CNP705) 1 connector 3 insulator (CNP706) 4 optical pick-up block (KSM-900AAA) 3 two insulators 3-6. OPTICAL PICK-UP (KSS-900A) 4 screw (B1.7 × 4) 5 rack spring (780C) 8 optical pick-up...

  • Page 8: Dsp Case (Rear)

    ICF-CD555TV 3-7. DSP CASE (REAR) 7 five claws 7 four claws 0 slider (DSP) (R) 8 DSP case (rear) 2 case (shaft) 1 four claws 7 four claws 9 slider (DSP) (L) 3 four screws 6 two screws 4 Push the button (release).

  • Page 9: Lcd Unit (Lcd1)

    ICF-CD555TV 3-9. LCD UNIT (LCD1) 1 two screws 2 two brackets (DSP) 3 insulating sheet (DSP) 4 LCD unit (LCD1) 3-10. THE CABLE PROCESSING METHOD WHICH CONNECTS A MAIN BOARD AND TV BOARD Note: When connecting cable, set it as shown in the figure.

  • Page 10: Test Mode

    ICF-CD555TV SECTION 4 TEST MODE LCD TEST MODE Procedure: 1. Turn the power ON while pressing simultaneously three keys [VOLUME --] [TV/VIDEO] 2. The microprocessor version will be displayed on the LCD. 3. Press the key. The LCD display will become as follows.
  • Page 11 ICF-CD555TV CD TEST MODE Procedure: 1. Connect 120 kΩ and 47 kΩ resistors in parallel to the TP604 on the SIDE-KEY board, and short another end of resistors to the GND, and the CD TEST MODE will be activated. 2. Insert a CD disc.
  • Page 12 ICF-CD555TV TV TEST MODE Procedure: 1. Turn the power ON while pressing simultaneously two keys [VOLUME --] 2. When the TV test mode is activated, the TV monitor will be- come as follows. SR7570 TEST MODE MENU 1. INITIAL MENU 2.

  • Page 13: Electrical Adjustments

    ICF-CD555TV SECTION 5 ELECTRICAL ADJUSTMENTS 0 dB=1 µV AM IF ADJUSTMENT TUNER SECTION Adjust for a maximum reading on level meter [AM] 450 kHz Setting: Function: RADIO AM VCO VOLTAGE ADJUSTMENT Band: AM Adjustment Part Frequency Display Reading on Digital Voltmeter 1.0 ±...
  • Page 14 ICF-CD555TV Adjustment and Connecting Location: – TUNER BOARD (Component Side) – T2 FM IF Adjustment AM VCO Voltage Adjustment T1 AM IF Adjustment FM VCO Voltage Adjustment FM Tracking Adjustment AM Tracking Adjustment – TUNER BOARD (Conductor Side) – (ANT)

  • Page 15: Cd Section

    ICF-CD555TV CD SECTION Perform all CD section check in the test mode. FOCUS BIAS CHECK Procedure: 1. Connect the oscilloscope to TP (RF) and TP (VREF) on the CD board. 2. Set the CD TEST MODE. (Refer to CD TEST MODE (See page 9)) 3.

  • Page 16: Monitor Section

    ICF-CD555TV 5-1-5. 3.9V CHECK MONITOR SECTION Connection: 5-1. VOLTAGE CHECK digital voltmeter TP1411 5-1-1. VDD (3.3V) CHECK Connection: digital – voltmeter TP1904 TP1403 (GND) Checking Procedure: – 1. Connect a digital voltmeter to the TP1411 on the TV board. 2. Check that the reading of digital voltmeter is 3.85 ± 0.2 V.
  • Page 17 ICF-CD555TV 5-3-2. POSITION SET UP ADJUSTMENT 5-7. VIDEO BUS ADJUSTMENT Check the B level of the waveform on the oscilloscope is 4.2 ± 0.1 Vp-p and adjust the RV1551 so that the C level of the waveform Connection: (5-7-1 to 5-7-9) on the oscilloscope is –2.4 ±...
  • Page 18 ICF-CD555TV 5-7-3. Y GAIN (LUMINANCE SIGNAL CONTRAST 5-7-7. B-SUB BRT (B-CH SUB BRIGHT) ADJUSTMENT LEVEL) ADJUSTMENT Adjusting Procedure: Adjusting Procedure: 1. Connect an oscilloscope of 1 step voltage to the TP1960 on 1. Connect an oscilloscope to the TP1959 on the TV board.
  • Page 19 ICF-CD555TV Connection: (5-7-10 to 5-7-12) INPUT VIDEO jack (JK301) NTSC pattern generator 5-7-10. VCO FREE RUN ADJUSTMENT Condition: Input the NTSC video signal (10 step (no burst)) (1 Vp-p 75 Ω) to the INPUT VIDEO jack (JK301) on the MAIN board from NTSC pattern generator.
  • Page 20 ICF-CD555TV Connecting and Adjustment Location: – TV BOARD (Component Side) – RV1551 V COM Adjustment RV1651 PLL Adjustment TP1805 TP1806 – TV BOARD (Conductor Side) – TP1912 TP1403 TP1911 TP1959 TP1401 TP1958 TP1960 TP1955 TP1904 TP1508 TP1651 TP1907 TP1411 TP1554...

  • Page 21: Diagrams

    ICF-CD555TV SECTION 6 DIAGRAMS 6-1. BLOCK DIAGRAM – CD Section – • R-ch is omitted due to same as L-ch. RF AMP, FOCUS/TRACKING SERVO, DIGITAL SIGNAL PROCESSOR, CLV SERVO, • SIGNAL PATH FIN2 DIGITAL FILTER, D/A CONVERTER : CD PLAY...

  • Page 22: Block Diagram - Tuner Section

    ICF-CD555TV 6-2. BLOCK DIAGRAM – TUNER Section – FM IFT FM IF FM/AM RF AMP, MIX, OSC, FM/AM IF AMP, DET, MPX L-OUT TU LCH IF IN RF IN MIX OUT FM IF (Page 24) (Page 24) RF AMP MUTE...

  • Page 23: Block Diagram - Monitor Section

    ICF-CD555TV 6-3. BLOCK DIAGRAM – MONITOR Section – TV LCH AUDIO JK301 R-CH (Page 24) LIQUID CRYSTAL INPUT DISPLAY MODULE MUTING TV/VIDEO VIDEO LCD1 Q104 SELECT SWITCH X1501 IC304 3.579545MHz TU501 V COM AMP V COM BIAS VCOMOUT 28 VCOM...

  • Page 24: Block Diagram - Main Section

    ICF-CD555TV 6-4. BLOCK DIAGRAM – MAIN Section – POWER AMP CD LCH IC301 (Page 21) CD LIN INPUT TU LCH R LIN SEL L V LIN L OUT L IN L OUT VOLUME SURROUND TONE LINE AMP SP101 (Page 22)

  • Page 25: Note For Printed Wiring Boards And Schematic Diagrams

    ICF-CD555TV Ver. 1.1 • Circuit Boards Location 6-5. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS Note on Printed Wiring Boards: Note on Schematic Diagram: • X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. pF: µµF •...

  • Page 26: Printed Wiring Boards - Cd Section

    ICF-CD555TV PRINTED WIRING BOARDS – CD Section – • 6-6. :Uses unleaded solder. See page 25 for Circuit Boards Location. CD BOARD R707 Q701 RELAY BOARD C701 C702 R729 R728 R710 R709 JC704 R726 JW729 R732 JC703 R730 R713 JW732...

  • Page 27: Schematic Diagram - Cd Section

    ICF-CD555TV Ver. 1.1 SCHEMATIC DIAGRAM – CD Section – • • 6-7. See page 42 for Waveforms. See page 43 for IC Block Diagrams. CNP706 CNP704 M701 (SLED) S701 (LIMIT) ON:WHEN THE OPTICAL PICK-UP IS INNER POSITION M702 (SPINDLE) CNP705...

  • Page 28: Printed Wiring Board - Tuner Section

    ICF-CD555TV PRINTED WIRING BOARD – TUNER Section – • 6-8. :Uses unleaded solder. See page 25 for Circuit Boards Location. • Semiconductor Location Ref. No. Location C-11 C-11 JC12 (ANT) TRANS BOARD (Page 40) (SHIELD CASE) MAIN BOARD (Page 30)

  • Page 29: Schematic Diagram - Tuner Section

    ICF-CD555TV SCHEMATIC DIAGRAM – TUNER Section – • • 6-9. See page 42 for Waveform. See page 43 for IC Block Diagrams. AM FERRITE-ROD ANTENNA 220p (VT) KV1520NT 100p AM OSC 0.22 0.001 JC12 JC11 0.01 220k 100p 0.01 0.001 100k 0.01...

  • Page 30: 6-10. Printed Wiring Boards - Main Section

    ICF-CD555TV 6-10. PRINTED WIRING BOARDS – MAIN Section – • :Uses unleaded solder. See page 25 for Circuit Boards Location. • Semiconductor Location CLOSE-TV BOARD Ref. No. Location D103 D104 D203 (Page 26) (Page 39) (Page 39) (Page 39) (Page 39)

  • Page 31: 6-11. Printed Wiring Boards - Panel Section

    ICF-CD555TV 6-11. PRINTED WIRING BOARDS – PANEL Section – • :Uses unleaded solder. See page 25 for Circuit Boards Location. MAIN BOARD CN410 LCD BOARD SIDE-KEY BOARD (Page 30) MAIN BOARD R655 CN403 (Page 30) IC651 R654 C653 CN405 CN404...

  • Page 32: Schematic Diagram - Main Section (1/3)

    ICF-CD555TV Ver. 1.2 6-12. SCHEMATIC DIAGRAM – MAIN Section (1/3) – • • See page 48 for IC Pin Function Description. See page 42 for Waveforms. LCD651 LIQUID CRYSTAL DISPLAY R651 D651 D652 TLFGE53T TLFGE53T R655 REMOTE CONTROL D651,652 RECEIVER...

  • Page 33: Schematic Diagram - Main Section (2/3)

    ICF-CD555TV 6-13. SCHEMATIC DIAGRAM – MAIN Section (2/3) – • See page 43 for IC Block Diagrams. (Page 32) (2/3) CD TRAY OPEN/CLOSE MOTOR DRIVE AMUTE IC305 BA6208 CN412 R111 R128 R131 470k M301 C359 D104 R132 1SS355 CD TRAY...

  • Page 34: Schematic Diagram - Main Section (3/3)

    ICF-CD555TV 6-14. SCHEMATIC DIAGRAM – MAIN Section (3/3) – • • See page 42 for Waveform. See page 43 for IC Block Diagram. (Page 33) (3/3) TU501 TV TUNER UNIT (BTF-PA402Z) VHF/UHF R257 CN409 220k S701 DISPLAY RELEASE R157 R359...

  • Page 35: Schematic Diagram - Monitor Section (1/3)

    ICF-CD555TV Ver. 1.1 6-15. SCHEMATIC DIAGRAM – MONITOR Section (1/3) – • • See page 42 for Waveforms. See page 43 for IC Block Diagram. (1/3) CN1801 TP1805 F1801 R1803 L1801 BACK LIGHT Q1802 Q1803 100µH TP1806 2SB1188 R1805 2SA1385-L...

  • Page 36: Schematic Diagram - Monitor Section (2/3)

    ICF-CD555TV 6-16. SCHEMATIC DIAGRAM – MONITOR Section (2/3) – • • See page 48 for IC Pin Function Description. See page 42 for Waveform. (2/3) L1652 TP1651 10µH C1651 R1652 L1651 1000p 47µH R1661 L1603 C1612 C1611 C1608 47µH RV1651 0.01...

  • Page 37: Schematic Diagram - Monitor Section (3/3)

    ICF-CD555TV 6-17. SCHEMATIC DIAGRAM – MONITOR Section (3/3) – • • • See page 48 for IC Pin Function Description. See page 42 for Waveform. See page 43 for IC Block Diagram. (Page 35) (3/3) R1447 C1428 100k C1429 C1420...

  • Page 38: Printed Wiring Board - Monitor Section (Component Side)

    ICF-CD555TV 6-18. PRINTED WIRING BOARD – MONITOR Section (Component Side) – • :Uses unleaded solder. See page 25 for Circuit Boards Location. • Semiconductor Location TV BOARD (COMPONENT SIDE) Ref. No. Location D1601 D1652 D1653 D1654 D1655 LCD1 LIQUID CRYSTAL...

  • Page 39: Printed Wiring Board - Monitor Section (Conductor Side)

    ICF-CD555TV 6-19. PRINTED WIRING BOARD – MONITOR Section (Conductor Side) – • :Uses unleaded solder. See page 25 for Circuit Boards Location. • Semiconductor Location TV BOARD (CONDUCTOR SIDE) Ref. No. Location D1401 D1402 D1501 D1801 D-11 Q1911 D1901 B C E...

  • Page 40: 6-20. Printed Wiring Boards - Amp/Power Supply Section

    ICF-CD555TV 6-20. PRINTED WIRING BOARDS – AMP/POWER SUPPLY Section – • See page 25 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor Location Ref. No. Location MAIN BOARD AMP BOARD D101 CN302 (Page 30) D102 D201 D202 D901 C908...

  • Page 41: 6-21. Schematic Diagram - Amp/Power Supply Section

    ICF-CD555TV Ver. 1.1 6-21. SCHEMATIC DIAGRAM – AMP/POWER SUPPLY Section – • See page 43 for IC Block Diagram. POWER AMP IC301 BA5417 C119 C219 C114 C218 C118 R116 0.47 1000 1000 4.7k D101 R120 CN301 1SS355 Q103 2SD1757K SP101...
  • Page 42 ICF-CD555TV • Waveforms – CD Board – – MAIN Board – – TV Board – – TUNER Board – 1 IC701 4 (RF) (CD play mode) qa IC2 w; (XOUT) wa IC401 ua (XT2) ea IC1501 ql (B-OUT) eg IC1501 es (HDOUT)

  • Page 43: Ic Block Diagrams

    ICF-CD555TV • IC Block Diagrams – CD Board – IC701 LC78646E-E 78 77 76 75 74 73 72 71 69 68 67 66 65 64 63 62 61 FIN1 – FIN2 – TIN1 TBAL – – TIN2 – – TBAL –...

  • Page 44: Tuner Board

    ICF-CD555TV IC702 BA5826FP-E2 SP– D.BUFF SL– D.BUFF LEVEL D.BUFF SHIFT D.BUFF SPIN LEVEL SHIFT SLIN THERMAL SHUT-DOWN MONITOR (SLIN) REG–B VREF REGO MUTE (FIN) DRIVER MUTE (TIN) LEVEL LEVEL SHIFT D.BUFF SHIFT D.BUFF F– T– D.BUFF D.BUFF OPOUT OPIN – TUNER Board –...

  • Page 45: Main Board

    ICF-CD555TV IC2 LC72137M-TLM-E XOUT REFERENCE DIVIDER AOUT PHASE 12BITS DETECTOR PROGRAMMABLE CHARGE DIVIDER PUMP UNLOCK DETECTOR POWER ON RESET SWALLOW COUNTER FMIN 1/16,1/17 4BITS UNIVERSAL COUNTER AMIN IFIN – MAIN Board – IC302 BD3870FS-E2...
  • Page 46 ICF-CD555TV IC304 BU4053BCF-E2 IC305 BA6208 MOTOR SWITCH DRIVE B.COM OPEN A.COM MOTOR SWITCH DRIVE C.COM OPEN OPEN – TV Board – IC1501 AN2546FH-AV IIC BUS SYNC REGULATOR LOGIC LOGIC LOGIC SEPARATOR RST 49 LOGIC V SYNC PHASE HHKILL F DET...
  • Page 47 ICF-CD555TV IC1551 µPD6467GR-546-E1 DISPLAY CONTROL 20 VSYNC DATA REGISTER DATA 19 HSYNC BACK GROUND CONTROL DATA REGISTER 18 VB OUTPUT INSTRUCTION 17 VG DATA INPUT DATA CMDCT SHIFT 1bit x 336 word REGISTER 16 VR REVERSE DATA 15 VBLK 1bit x 336 word...
  • Page 48 ICF-CD555TV • IC Pin Function Description MAIN BOARD IC401 µPD789478GC-A31-8BT (SYSTEM CONTROLLER) Pin No. Pin Name Description 1, 2 — Not used 3 to 5 VLC2 to VLC0 — Terminal for doubler circuit capacitor connection to develop liquid crystal display drive voltage...
  • Page 49 ICF-CD555TV Pin No. Pin Name Description System reset signal input from the reset signal generator “L”: reset RESET For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H” A MUTE Audio muting on/off control signal output terminal “L”: muting on RADIO ON Power on/off control signal output for the radio section “L”: power on...
  • Page 50 ICF-CD555TV TV BOARD IC1401 µPD789477GC-A45-8BT (TV SYSTEM CONTROLLER) Pin No. Pin Name Description — 1 to 25 Not used TFT TEST MODE Monitor test mode setting terminal “H”: test mode on 27 to 29 — Not used T-AGC TV AGC on/off control signal output to the TV tuner unit T-MUTE TV muting on/off control signal output to the TV tuner unit “H”: muting on...
  • Page 51 ICF-CD555TV TV BOARD IC1551 µPD6467GR-546-E1 (OSD DRIVER) Pin No. Pin Name Description SCLK Serial data transfer clock signal input from the TV system controller Chip select signal input from the TV system controller DATA Serial data input from the TV system controller Clear signal input after the power supply rises —...
  • Page 52 ICF-CD555TV TV BOARD IC1601 MN5814 (LCD CONTROLLER) Pin No. Pin Name Description SYNCIN Composite sync signal input terminal Not used HSYNCIN Horizontal sync signal input from the RGB decoder 3, 4 SIDE2, SIDE1 Screen size selection signal input from the TV system controller...

  • Page 53: Exploded Views

    ICF-CD555TV Ver. 1.1 SECTION 7 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark 0 are may have some difference from the original are seldom required for routine service.

  • Page 54: Cabinet (Front) Section

    ICF-CD555TV 7-2. CABINET (FRONT) SECTION D652 LCD board D651 LCD651 D653 not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * 51 A-4547-295-A LCD BOARD, COMPLETE X-2021-186-1 CABINET (FRONT) SUB ASSY (WHITE) 3-264-174-01 HOLDER (LCD)

  • Page 55: Cabinet (Lower) Section-1

    ICF-CD555TV Ver. 1.1 7-3. CABINET (LOWER) SECTION-1 MAIN board section, CD tray assy section not supplied F901, F902 SP101 T901 SP201 cabinet (lower) section-1 The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety.

  • Page 56: Cabinet (Lower) Section-2

    ICF-CD555TV Ver. 1.3 7-4. CABINET (LOWER) SECTION-2 not supplied not supplied not supplied (CLOSE-TV board) not supplied not supplied TV assy section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-264-186-01 BUTTON (RELEASE) 3-264-187-01 HOOK (RELEASE) 3-253-143-01 SCREW (B2.6), (+) P TAPPING...

  • Page 57: Tv Assy Section

    ICF-CD555TV 7-5. TV ASSY SECTION LCD1 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-2021-185-1 CASE (FRONT), DSP SUB ASSY (SILVER) 3-265-572-01 SLIDER (DSP) (R) X-2021-188-1 CASE (FRONT), DSP SUB ASSY (WHITE) 3-264-183-01 CASE (REAR), DSP...

  • Page 58: Main Board Section

    ICF-CD555TV 7-6. MAIN BOARD SECTION not supplied M301 not supplied not supplied CD tray section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-264-181-01 GEAR * 259 1-861-834-11 CD-CLOSE BOARD 3-252-828-01 SCREW (B2.6), (+) PWH TAPPING...

  • Page 59: Cd Tray Assy Section

    ICF-CD555TV 7-7. CD TRAY ASSY SECTION optical pick-up section (KSM-900AAA) not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-253-143-01 SCREW (B2.6), (+) P TAPPING 3-264-175-01 TRAY (UPPER), CD 3-264-190-01 TRAY (LOWER), CD...

  • Page 60: Optical Pick-Up Section (Ksm-900Aaa)

    ICF-CD555TV Ver. 1.1 7-8. OPTICAL PICK-UP SECTION (KSM-900AAA) (including M701, M702) not supplied not supplied (M702) not supplied (M701) The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety.

  • Page 61: Electrical Parts List

    ICF-CD555TV Ver. 1.1 SECTION 8 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark 0 are parts list may be different from the parts speci- are seldom required for routine service.
  • Page 62 ICF-CD555TV Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C746 1-104-658-91 ELECT 100uF R140 1-216-829-11 METAL CHIP 4.7K 1/10W R216 1-216-829-11 METAL CHIP 4.7K 1/10W C751 1-164-156-11 CERAMIC CHIP 0.1uF R220 1-216-821-11 METAL CHIP 1/10W C754 1-162-970-11 CERAMIC CHIP 0.01uF...
  • Page 63 ICF-CD555TV CD-CLOSE CD-OPEN CLOSE-TV FRONT-KEY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R613 1-216-837-11 METAL CHIP 1/10W R728 1-216-833-11 METAL CHIP 1/10W R614 1-216-845-11 METAL CHIP 100K 1/10W R729 1-216-813-11 METAL CHIP 1/10W R615 1-216-841-11 METAL CHIP...
  • Page 64 ICF-CD555TV Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-4547-287-A MAIN BOARD, COMPLETE C661 1-162-927-11 CERAMIC CHIP 100PF ********************* C662 1-162-927-11 CERAMIC CHIP 100PF C663 1-162-927-11 CERAMIC CHIP 100PF 3-253-143-01 SCREW (B2.6), (+) P TAPPING...
  • Page 65 ICF-CD555TV MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C352 1-126-964-11 ELECT 10uF C354 1-126-934-11 ELECT 220uF C506 1-125-837-11 CERAMIC CHIP 6.3V C355 1-126-947-11 ELECT 47uF C507 1-162-970-11 CERAMIC CHIP 0.01uF C508 1-162-968-11 CERAMIC CHIP 0.0047uF 10%...
  • Page 66 ICF-CD555TV MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark CN406 1-815-446-11 PIN, CONNECTOR (PWB) 5P < COIL/SHORT > CN408 1-784-775-11 CONNECTOR, FFC 14P CN409 1-815-443-11 PIN, CONNECTOR (PWB) 2P L401 1-412-963-11 INDUCTOR 100uH CN410 1-770-168-11 FFC/CONNECTOR, FPC (LIF (NON-ZIF)) 16P...
  • Page 67 ICF-CD555TV MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R128 1-216-821-11 METAL CHIP 1/10W R406 1-216-845-11 METAL CHIP 100K 1/10W R131 1-216-809-11 METAL CHIP 1/10W R408 1-216-845-11 METAL CHIP 100K 1/10W R132 1-216-821-11 METAL CHIP...
  • Page 68 ICF-CD555TV Ver. 1.1 MAIN MOTOR RELAY SIDE-KEY TRANS Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R469 1-216-821-11 METAL CHIP 1/10W R967 1-216-829-11 METAL CHIP 4.7K 1/10W R470 1-216-821-11 METAL CHIP 1/10W R968 1-216-825-11 METAL CHIP 2.2K...
  • Page 69 ICF-CD555TV TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-781-962-21 FILTER, CERAMIC A-3663-818-A TUNER BOARD, COMPLETE < CONNECTOR > ********************** < CAPACITOR > * CNP1 1-785-663-11 PIN, CONNECTOR (PC BOARD) 11P 1-162-923-11 CERAMIC CHIP 47PF <...
  • Page 70 ICF-CD555TV TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1509 1-107-826-11 CERAMIC CHIP 0.1uF 1-216-864-11 SHORT CHIP C1510 1-107-826-11 CERAMIC CHIP 0.1uF 1-216-835-11 METAL CHIP 1/10W C1511 1-107-826-11 CERAMIC CHIP 0.1uF 1-216-817-11 METAL CHIP 1/10W...
  • Page 71 ICF-CD555TV Ver. 1.1 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1570 1-162-919-11 CERAMIC CHIP 22PF C1953 1-107-826-11 CERAMIC CHIP 0.1uF C1954 1-119-772-11 ELECT 47uF C1571 1-162-919-11 CERAMIC CHIP 22PF C1955 1-107-826-11 CERAMIC CHIP 0.1uF C1572...
  • Page 72 ICF-CD555TV Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark L1504 1-400-145-21 INDUCTOR 47uH R1416 1-216-821-11 METAL CHIP 1/10W L1551 1-400-145-21 INDUCTOR 47uH R1418 1-216-833-11 METAL CHIP 1/10W L1552 1-412-955-11 INDUCTOR 22uH R1419 1-216-809-11 METAL CHIP 1/10W...
  • Page 73 ICF-CD555TV Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1523 1-216-841-11 METAL CHIP 1/10W R1622 1-216-864-11 SHORT CHIP R1524 1-216-821-11 METAL CHIP 1/10W R1623 1-216-864-11 SHORT CHIP R1525 1-216-825-11 METAL CHIP 2.2K 1/10W R1526 1-216-833-11 METAL CHIP...
  • Page 74 ICF-CD555TV Ver. 1.1 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark ************************************************************ MISCELLANEOUS ************** 1-829-096-11 CABLE, FLEXIBLE FLAT (17 CORE) 1-829-095-11 CABLE, FLEXIBLE FLAT (16 CORE) 0 108 1-828-104-11 CORD, POWER 1-829-094-11 CABLE, FLEXIBLE FLAT (20 CORE)
  • Page 75 ICF-CD555TV MEMO...

  • Page 76: Revision History

    ICF-CD555TV REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2004.03...

Table of Contents