Sony X900E Series Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. LCD TV
  5. X900E Series
  6. Service manual

Sony X900E Series Service Manual

Hide thumbs Also See for X900E Series:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
*Table of contents is on the last page. Please also utilize "Bookmarks" function / "Find" function on Acrobat PDF data.
X900E Series
ORIGINAL MANUAL ISSUE DATE: 1/2017
GN3TR CHASSIS
KS Segment
Version
Date
Subject
1.0
1/2017
Original manual issue.
LCD TV
9-888-810-01

Advertisement

Table of Contents
loading

Related Manuals for Sony X900E Series

Summary of Contents for Sony X900E Series

  • Page 1: F Cover

    SERVICE MANUAL *Table of contents is on the last page. Please also utilize "Bookmarks“ function / "Find" function on Acrobat PDF data. X900E Series ORIGINAL MANUAL ISSUE DATE: 1/2017 GN3TR CHASSIS KS Segment Version Date Subject 1/2017 Original manual issue.

  • Page 2: Model List

    MODEL LIST MODEL COLOR COMMANDER DEST. MODEL COLOR COMMANDER DEST. XBR-55X900E Black RMF-TX200U (UC2) US/CND (LA1) MEXICO XBR-65X900E Black RMF-TX200U (UC2) US/CND XBR-55/65X900E...

  • Page 3: Warnings And Cautions

    Components identified by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operation are identified in this manual.
  • Page 4 Les composants identifi es par une trame et par une marque du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifi es dans le present manuel.
  • Page 5 WARNINGS AND CAUTIONS USE CAUTION WHEN HANDLING THE LCD PANEL When repairing the LCD panel, be sure you are grounded by using a wrist band. When repairing the LCD panel on the wall, the LCD panel must be secured using the 4 mounting holes on the rear cover. Do not press on the panel or frame edge to avoid the risk of electric shock.

  • Page 6: Safety Check-Out

    SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges. 2.
  • Page 7 SAFETY CHECK-OUT Leakage Test (To protect electric shock when customer touch the terminal.) Leakage current can be measured by V: Voltmeter or oscilloscope (r.m.s. or peak reading) Stabilized power supply instrument and isolated voltage transformer: Use too much current capacity and isolated voltage transformer does not need to use stabilized power supply equipment Specification of RMS volt meter: Input resistance >...

  • Page 8: Self Diagnosis Function

    SELF DIAGNOSIS FUNCTION The units in this manual contain a self-diagnostic function. If an error occurs, the Smart Core Red LED will automatically begin to flash. The number of times the LED flashes translates to a probable source of the problem. A definition of the Smart Core Red LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 9 SELF DIAGNOSIS FUNCTION [SELF DIAGNOSTIC SCREEN DISPLAY] Error count Error Item SELF CHECK Format of error timestamps YYMMDDhhmmss (in UTC) Back << Example: MAIN POWER 000000000000 000000000000 000000000000 120823132523 -> Aug 23 2012 13:25:23 UTC DC ALERT 000000000000 000000000000 000000000000 * Only when time is set, an error timestamp is saved.

  • Page 10: Adjustment

    ADJUSTMENT HOW TO ENTER SERVICE MODE 1) Turn on the main power switch to place the set in standby condition. 2) Press the buttons on the remote commander as follows, and entering service mode. 3) Service mode display. Service Mode Model Information >>...
  • Page 11 ADJUSTMENT SOFTWARE VERSION 1) In Service Mode, select “Model Information”, press “Enter” or “→” button to enter Status Information. Main Micro Service Mode SW Version: PKG1.1.0.03.26.1.00.0 Model NVM Version: 0043 CEI Model Information >> Boot Version: V1.00000000 PQ Version: 02000001 Self diagnosis History >>...
  • Page 12 ADJUSTMENT SERIAL NUMBER EDIT (1) Service Mode 1) In “Service Mode”, select “Model Information” by pressing “↑” or “↓” button then pressing “Enter” or Model Information >> “→” button to enter inside. Self diagnosis History >> Video / Audio >> 2) Select “Serial Number Edit”...
  • Page 13 ADJUSTMENT SERIAL NUMBER EDIT (2) YES is selected, the input data is saved into EEPROM. Model SERIAL NUMBER EDIT is grayed out and the serial number that has been input is displayed. Status Information >> Operator will not be able to edit anymore.
  • Page 14 ADJUSTMENT MODEL NUMBER SETTING 1) In “Service Mode”, select “Model Information” by pressing “↑” or “↓” button then pressing “Enter” or “→” button to enter inside. 2) Select “Model Number Setting” by pressing “↑” or “↓” button then pressing “Enter” or “→” button. 3) Press “↑”...
  • Page 15 ADJUSTMENT WB ADJUSTMENT (If necessary) In “Panel/PQ” service mode. c. To change data, press “←” or “→” button on remote commander. a. Go to “WB Adjustment” category by “↑” or “↓”. Service Mode Back << R WB Gain <[ ]> Model Information >>...
  • Page 16 ADJUSTMENT 2. In “WB/Mura/CUC data transfer”. WB/MURA/CUC DATA TRANSFER a. Select “WB/Gamma data transfer” by pressing “↑” or “↓” button on remote commander. (Please apply Main board or panel is replaced.) 1. In “Panel/PQ” service mode. b. To change the items, press “←” or “→” button on remote commander and press “Enter” a.

  • Page 17: Usb Update

    USB UPDATE *Please refer to another manual “Service Procedure for Panel, Board and Software Change / Upgrade(P/N:98881800x)” for details. GN3TR chassis is the same as GN1T chassis basically. 1:Download USB image and unzip file. 2: copy unzip file to USB memory root folder. 3: USB memory insert TV.

  • Page 18: Trouble Shooting

    TROUBLE SHOOTING TRIAGE Confirm the symptom from the customer. Select that symptom from the chart. Bring all the boards and cables listed for that symptom. Follow the troubleshooting charts in the technical guides to isolate the board. Chart Color Code. RED DOT: Most likely defective part BLUE TRIANGLE: Secondary possible defective part BLACK TEXT: Board that may correct the symptom...

  • Page 19: Flow

    TROUBLE SHOOTING FLOW 1-1. NO POWER WITH AC-ADP No Power (Both side are No power.) AC Adaptor Check POWER_MAIN (Only single side is 19.5V or 24V.) Replace Check C409 Between JK* board to F9000 F9000 near CN400 B* board Harness On JK* board on B* board (Both side are...
  • Page 20 TROUBLE SHOOTING FLOW 1-2. NO POWER U-COM FAILURE START Check 12V_MON Check +12V_MAIN Line Check VDD Check +3.3V_STBY LIne (C521, CN400 #14pin) R446 Voltage. (G board or JK board). C506 Voltage. And (only for AC-ADP model) Is the voltage >2.6V? Is the voltage >3.0V? 3.3V_DDCON (IC403) (only for AC-ADP model)
  • Page 21 TROUBLE SHOOTING FLOW 1-2. NO POWER U-COM FAILURE Previous page Check P_ON_#2 CL417 or P-on ucom #pin13 Change IC401 is >3.0V? Check P_ON_HL CL414 or P-on ucom #pin18 Change IC401 is >3.0V? Check ORESETB CL416 or P-on ucom #pin14 Change IC401 Is the voltage >3.0V? Check X_SYSTEM_RST CL412 or P-on ucom #pin20...
  • Page 22 TROUBLE SHOOTING FLOW 1-3. NO POWER DDCON/LDO DDCONs CHECK ON JK* START Check fuse F9001 Change Fuse Is fuse OK? (Both side are No power.) AC Adaptor Check Vcc voltage Check C9023 F9000 F9000 Is voltage >18V? On JK* board (Only single side is 19.5V or 24V.) (Both side are...
  • Page 23 TROUBLE SHOOTING FLOW 1-3. NO POWER DDCON/LDO LDOs CHECK DDCONs CHECK START START Check fuse Check +3.3V_DDC_OUT Check Vcc voltage DDCON (IC403) F4xx or F6xx Change Fuse C6xx Is fuse OK? Is voltage >3V? +3.3V_STBY (G* board) 1) Check POWER_ON P-on ucom #pin10 Check Vcc voltage (Refer to No Power U-Com Failure) Check Enable pin...
  • Page 24 TROUBLE SHOOTING FLOW 2-1. LED BLINKING 2X (MAIN POWER ERROR) LED 2x blinking Check “+12V_MAIN” G board at pin 11/13 of CN400 JK board on B* board, AC Adapter Voltage > 13.2V ? BMKS / BMKP board XBR-55/65X900E...
  • Page 25 TROUBLE SHOOTING FLOW 2-2. LED BLINKING 3X (DC ALERT AND AUDIO ERROR) DC_ALERT AUDIO ERROR 3-times blinking 3-times blinking (Audio Error) (DC Alert) Power Off Check Go to No Sound (Power Off Check) Check “POWER_MAIN” Check “+5.0V_VBUS” at pin 17/19 of CN400 on B* board, at C431 on B* board Other flows...
  • Page 26 TROUBLE SHOOTING FLOW 2-3. LED BLINKING 4X (LED VOLTAGE ERROR AND BCM ERROR) LED VOLTAGE ERROR 4-times blinking (LED Voltage) Check “+1.8V_TU” Check “BL_LD_ERR” at C464 at CL1038 on BMKS board Replace LD board Panel on BMKS board 0.95V < Voltage < 1.85V ? Voltage >...
  • Page 27 TROUBLE SHOOTING FLOW 2-4. LED BLINKING 5X (PANEL ID READ ERROR) 5-times blinking Check Replace “+12.5V_TCON” G/JK board G/JK board at C400 on BMKS Symptom improve Replace the Harness Between G/JK board Harness and BMKS Symptom improve Replace V-By-One FFC the V-By-One FFC is suspicious Symptom improve...
  • Page 28 TROUBLE SHOOTING FLOW 2-5. LED BLINKING 6X (BACKLIGHT ERROR) 6-times blinking Harness / Connection Symptom Check Voltage of Voltage ≥ 1.9 V Check broken Improvement Replace “BL_LD_ERR_DET” harness/connection Harness harness at CL1038 on BMKS G/LD board to BMKS improvement Voltage < 1.9 V Symptom Harness / LED driver or G board...
  • Page 29 TROUBLE SHOOTING FLOW 2-6. LED BLINKING 7X (TEMPERATURE ERROR) 2-7. LED BLINKING 8X (4KPQ ERROR) 7-times blinking 8-times blinking Setting circumstance is OK? Set to another improvement Replace Temperature, location, etc. Other flows BMKS board Ventilation, etc. Symptom Improvement Replace BMKS/BMKP board, and Aging a few Panel BMKS board...
  • Page 30 TROUBLE SHOOTING FLOW 3-1. NO SOUND No Sound Without LED 3x Select [External Inputs] AV receiver is connected [BRAVIA Sync Settings] to HDMI in ? [BRAVIA Sync Control] [off] No sound only Go to Analog RF and Digital RF ? NO SOUND ( TUNER) [Speakers] setting is Change the setting to...
  • Page 31 TROUBLE SHOOTING FLOW 3-2. NO SOUND (POWER OFF CHECK) 3-3. NO SOUND (POWER ON CHECK) PVDD (POWER_AU) voltage is 240W AC Adaptor model : 24.0V Power On Check Power Off Check 200W AC Adaptor model : 19.5V Power Off Check From LED BLINKING 3X From LED BLINKING 3X Built-in power supply model : 12.5V...
  • Page 32 TROUBLE SHOOTING FLOW 3-4. NO SOUND (AUDIO HP/AUDIO OUT) 3-5. NO SOUND ( TUNER) No Sound Audio No Sound with normal picture HP/Audio out [Sound]→ [Headphone] Headphone Volume Increase Headphone Volume [Headphone/Audio out] is set to MIN? is set to ? Only RF tuner input? Replace B* board [Audio Out (Fixed)]...
  • Page 33 TROUBLE SHOOTING FLOW 3-6. NO SOUND (HDMI) No Sound Check the picture Refer to NO PICTURE (HDMI) Does this model have Check the mode Connect Stereo minijack cable between Source and the TV, Analog Audio In And Change “HDMI/DVI Audio Source” to Auto or Analog Audio In. of Source equipment (Stereo minijack)? HDMI...
  • Page 34 TROUBLE SHOOTING FLOW 4-1. NO PICTURE No Picture BL_ON (L or H): IC401 #7pin (for 4K BMKS/BMKP board) BL_ON：H Check Smart Core Check Replace Got Any Normal Replace LCD Panel Behavior BL_ON the V by One FFC Display? The B board (T-CON) (5x Blinking) on the B board...
  • Page 35 TROUBLE SHOOTING FLOW 4-2. NO PICTURE (VIDEO 1/VIDEO 2/COMPONENT) VIDEO 1 No Picture Video 1 No Picture Check J2601 Check if input OSD NG (Vpp: 0V) Connection, is GRAY OUT VIDEO_DET OK if it is highlighted At R2631 OK (Vpp: 3.3 V) Detailed check all NG (Vpp: 0V) parts at VIDEO2_DET...
  • Page 36 TROUBLE SHOOTING FLOW 4-2. NO PICTURE (VIDEO 1/VIDEO 2/COMPONENT) COMPONENT / VIDEO 2 No Picture Component Video 2 No Picture No Picture Check if input OSD NG (Vpp: 0 V) Check J2600 Con Check J2600 Check if input OSD is GRAY OUT NG (Vpp: 0 V) Connection, VIDEO_DET at R2626,...
  • Page 37 TROUBLE SHOOTING FLOW 4-3. NO PICTURE (TUNER) RF input no picture / noisy picture Notes: I2C I2C line for all tuners except Japan_SKP - Parts for I2C SDA line: R2800, C2803. Check RF source cable Change RF cable and antenna - Parts for I2C SCL line : R2801, C2804.
  • Page 38 TROUBLE SHOOTING FLOW 4-4. NO PICTURE (TUNER) FOR ANALOG TUNING Analog Tuning For LA-ISDB(BR/AR), LA-T2(COL) and TW only For Other destination Notes: Confirm ANT or Cable connection - Parts for IFOUT_N line : FB2801, C2807, C2826 - Parts for IFOUT_P line : FB2802, C2808, C2825 - Parts for IFAGC line : R2838, C2827 : Insert correct signal in correct terminal.
  • Page 39 TROUBLE SHOOTING FLOW 4-4. NO PICTURE (TUNER) FOR DIGITAL TUNING 1 Digital Tuning 1 For TW/LA-ISDB-T Notes: - Parts for IFOUT_N line : FB2801, C2807, C2826 - Parts for IFOUT_P line : FB2802, C2808, C2825 - Parts for IFAGC line : R2838, C2827 For NA-ATSC(MX/UC) Confirm ANT or Cable connection...
  • Page 40 TROUBLE SHOOTING FLOW 4-5. NO PICTURE (HDMI) HDMI1 No Picture Check the below point at All lines Connector side are NG Other Input is OK Check other - Check +5V line Replace HDMI input - Check HPD line CN3603 - Check DDC lines - Check TMDS lines All Inputs are NG TMDS lines...
  • Page 41 TROUBLE SHOOTING FLOW 4-5. NO PICTURE (HDMI) HDMI2 No Picture Check the below point at All lines Connector side are NG Other Input is OK Check other - Check +5V line Replace - Check HPD line HDMI input CN3600 - Check DDC lines All Inputs are - Check TMDS lines Other TV set...
  • Page 42 TROUBLE SHOOTING FLOW 4-5. NO PICTURE (HDMI) HDMI3 No Picture Check the below point at All lines Connector side Other Input is OK are NG Check other - Check +5V line Replace HDMI input - Check HPD line CN3601 - Check DDC lines All Inputs - Check TMDS lines are NG...
  • Page 43 TROUBLE SHOOTING FLOW 4-5. NO PICTURE (HDMI) HDMI4 No Picture Check the below point at All lines are Connector side Other Input is OK - Check +5V line Replace Check other HDMI input - Check HPD line CN3602 - Check DDC lines All Inputs - Check TMDS lines are NG...
  • Page 44 TROUBLE SHOOTING FLOW 5. KEY SWITCH BUTTONS ERROR Side key buttons error Check harness connection between B*board and switch Harness connection issue module Resistor value [BMKS] Change harness between B* B* board to switch module harness R1108 : 0 [ohm] board to switch module R1049 : 47k [ohm] issue...
  • Page 45 TROUBLE SHOOTING FLOW 6. IR REMOTE COMMANDER ERROR IR remote commander does not respond Center white LED blinks when Battery of remote commander pushing buttons of remote could be weak. commander at close to IR Change battery. sensor. Check harness connection Harness connection between B*board and Smart issue...
  • Page 46 TROUBLE SHOOTING FLOW 7. LIGHT SENSOR ERROR Backlight level does not change when ambient light changed Setting is “ON” Check UI setting and make Check harness connection Battery of remote commander sure light sensor setting is between B*board and Smart could be weak.
  • Page 47 TROUBLE SHOOTING FLOW 8. NETWORK MALFUNCTION ETHERNET (WIRED) [Network Set-up] >[Wired Set-up] on the TV Connection Results Connection Results Connection Results B* board Local Access Internet Access Cable Connection Failed Failed Failed Auto Check Wired Set-up Check cable B* board Proxy setting Local router IP address setting...
  • Page 48 TROUBLE SHOOTING FLOW 9. NETWORK MALFUNCTION INTERNAL WIRELESS NETWORK MALFUNCTION Wireless Network on the TV Is the Wi-Fi radio Error message or no scan result appear in strength too weak B* board the network setting? or even No signal? Check with another Wi-Fi Access Point Hardware defect suspected module...
  • Page 49 TROUBLE SHOOTING FLOW 10. BLUETOOTH MALFUNCTION Voice Remote doesn’t work 3D-glasses (Active) doesn’t work Bluetooth Speaker/Headphone/Headset doesn’t work Please refer Voice Remote manual Check BT antenna Home > Settings > 3D-glasses (Active) manual Connection is OK Bluetooth Settings Can read Bluetooth Speaker/Headphone/Headset operation manual Near discoverable Bluetooth Device...

  • Page 50: Pcb Parts Map

    TROUBLE SHOOTING PCB PARTS MAP BMKS (A side view) cam013 cam001 cam095 cam086 cam029 cam15 cam027 cam033 R4204 R4205 cam034 R4083 cam003 R4071 R4081 R4221 S300 R4072 R4077 cam5 R4066 CN4201 CN4001 IC4002 CN4200 IC4201 R4219 cam008 CN4003 cam014 cam10006 R4065 R4079 15x9...
  • Page 51 TROUBLE SHOOTING PCB PARTS MAP BMKS (B side view) KJ004 KJ003 cam009 cam008 cam17 cam210 cam209 cam208 JL2830 cam16 JL1226 JL1204 JL1228 JL1229 JL1223 JL1207 JL1218 JL1217 JL1008 JL1006 JL1004 JL1020 JL1001 JL1017 JL2816 JL1216 JL1215 JL1024 JL2813 JL2815 JL2817 JL2822 JL2808 JL2807...

  • Page 52: Block Diagrams

    BLOCK DIAGRAMS * depend on destinations. Some control lines are left out. Some control lines are left out. BMKS board * IR In Center Key RGBW LEDs Video signal * CAS/CI DDCs Audio signal L/R Keys Light Sens. Control Bus IR Rx Power * RF...

  • Page 53: Connector Diagrams

    CONNECTOR DIAGRAMS XBR-55X900E XBR-55/65X900E...
  • Page 54 CONNECTOR DIAGRAMS XBR-65X900E XBR-55/65X900E...

  • Page 55: Board Location

    BOARD LOCATION XBR-55X900E XBR-65X900E LD35 LD45 E-T-CON TSA2 BMKS SWITCH UNIT TSA2 BMKS SWITCH UNIT E-T-CON WLAN/BT MODULE(11AC) SMART CORE (S) UNIVERSAL SIL-TU WLAN/BT MODULE(11AC) SMART CORE (S) UNIVERSAL SIL-TU SMART CORE (S) HSC3-L XBR-55/65X900E...

  • Page 56: Wire Dressing

    WIRE DRESSING *This page is only the information which shows each rough location. XBR-55X900E XBR-65X900E VA Tape Slide Clamp x2 VA Tape Slide Clamp x2 Harness Tie x5 Harness Tie x5 • Hold wires • Hold wires ・Fix wire • Fix wire ・Fix wire •...

  • Page 57: Panel Handling

    PANEL HANDLING CARRYING 1. Carry panel vertically. 2. Do not hold or press O-Cell. 4. Do not hold the panel at the center area. 3. Hold panel by 2 people. XBR-55/65X900E...
  • Page 58 PANEL HANDLING PLACING TO TABLE Holding corner 1. Put the Panel by 2 operators. 2. Put the Panel within one flat table surface. XBR-55/65X900E...

  • Page 59: Disassembly

    PANEL HANDLING OTHERS 1. Do not press the panel during assembly / disassembly. 2. Do not touch Panel module without gloves. 4. Do not grasp the BC hook. 5. Do not grasp the LD Shield. 3. Do not grasp Source Shield. XBR-55/65X900E...

  • Page 60: Xbr-55X900E

    DISASSEMBLY • There are clutch in the yellow frame[ ]. Therefore please be careful in the case of the disassembly or assembly of parts. • [ ] indicates the part to disconnect or remove from the connectors or clampers. 1. XBR-55X900E 1-1.
  • Page 61 DISASSEMBLY 1. XBR-55X900E 1-2. BADGE, XBR LOGO(H3.7) BADGE, XBR LOGO(H3.7) P/N: 4-535-586-02 1-3. COVER, CARD (L SBT) COVER, CARD (L SBT) XBR-55/65X900E...
  • Page 62 DISASSEMBLY 1. XBR-55X900E 1-4. LABEL, REAR TERMINAL (SBT) AND LABEL, SIDE TERMINAL (SBT) LABEL, SIDE TERMINAL (SBT) LABEL, REAR TERMINAL (SBT) XBR-55/65X900E...
  • Page 63 DISASSEMBLY 1. XBR-55X900E 1-5. REAR COVER (L SBT) A NOTE: 4 screws (SCREW, ORNAMENTAL M6X12) P/N: 4-268-126-02 5 screws (SCREW +BVTP 3X10 TYPE2 IT-3) P/N: 7-685-647-79 13 screws (SCREW M3X3.0 STEP) P/N: 4-579-926-01 REAR COVER (L SBT) A XBR-55/65X900E...
  • Page 64 DISASSEMBLY 1. XBR-55X900E 1-6. TAPE AND WIRE DRESSING NOTE: TAPE TAPE TAPE TAPE XBR-55/65X900E...
  • Page 65 DISASSEMBLY 1. XBR-55X900E 1-7. SP-BOX ASSY, FY17 W25LARGE-EL Screw (SCREW, +PSW M3X6 W12) P/N: 4-256-393-12 SP-BOX ASSY, FY17 W25LARGE-EL XBR-55/65X900E...
  • Page 66 DISASSEMBLY 1. XBR-55X900E 1-8. TAPE NOTE: TAPE TAPE TAPE TAPE TAPE XBR-55/65X900E...
  • Page 67 DISASSEMBLY 1. XBR-55X900E 1-9. TAPE AND WIRE DRESSING NOTE: TAPE TAPE XBR-55/65X900E...
  • Page 68 DISASSEMBLY 1. XBR-55X900E 1-10. SP-BOX ASSY, FY17 W25LARGE-ER Screw (SCREW, +PSW M3X6 W12) P/N: 4-256-393-12 SP-BOX ASSY, FY17 W25LARGE-ER XBR-55/65X900E...
  • Page 69 DISASSEMBLY 1. XBR-55X900E 1-11. TAPE AND WIRE DRESSING NOTE: TAPE TAPE XBR-55/65X900E...
  • Page 70 DISASSEMBLY 1. XBR-55X900E 1-12. BT ANTENNA Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 BT ANTENNA XBR-55/65X900E...
  • Page 71 DISASSEMBLY 1. XBR-55X900E 1-13. WIRE DRESSING XBR-55/65X900E...
  • Page 72 DISASSEMBLY 1. XBR-55X900E 1-14. SMART CORE (S) NOTE: SMART CORE (S) 2 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 73 DISASSEMBLY 1. XBR-55X900E 1-15. SWITCH UNIT (3M-P) AND HOLDER SIDE SW (SBT M) Screw (SCREW M3X3.0 STEP) P/N: 4-579-926-01 SWITCH UNIT (3M-P) HOLDER SIDE SW (SBT M) XBR-55/65X900E...
  • Page 74 DISASSEMBLY 1. XBR-55X900E 1-16. HARNESS ASSY (MAIN) AND WLAN/BT MODULE(11AC) HARNESS ASSY (MAIN) P/N: 1-910-112-05 WLAN/BT MODULE(11AC) 2 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 75 DISASSEMBLY 1. XBR-55X900E 1-17. TSA2 AND BRACKET, TS (PUC) TSA2 BRACKET, TS (PUC) Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 76 DISASSEMBLY 1. XBR-55X900E 1-18. TAPE AND WIRE DRESSING AND CONNECTOR ASSY 30P TAPE CONNECTOR ASSY 30P P/N: 1-910-112-06 XBR-55/65X900E...
  • Page 77 DISASSEMBLY 1. XBR-55X900E 1-19. BRACKET, DC JACK (SBT) AND JK3 BRACKET, DC JACK (SBT) 4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 78 DISASSEMBLY 1. XBR-55X900E 1-20. TAPE AND FLEXIBLE FLAT CABLE 30P NOTE: FLEXIBLE FLAT CABLE 30P P/N: 1-910-112-04 TAPE XBR-55/65X900E...
  • Page 79 DISASSEMBLY 1. XBR-55X900E 1-21. TAPE NOTE: TAPE TAPE TAPE TAPE TAPE XBR-55/65X900E...
  • Page 80 DISASSEMBLY 1. XBR-55X900E 1-22. FLEXIBLE FLAT CABLE 51P AND FLEXIBLE FLAT CABLE 41P NOTE: FLEXIBLE FLAT CABLE 41P FLEXIBLE FLAT CABLE 51P P/N: 1-849-886-11 P/N: 1-849-891-11 XBR-55/65X900E...
  • Page 81 DISASSEMBLY 1. XBR-55X900E 1-23. SLIDE, CLAMP SLIDE, CLAMP SLIDE, CLAMP XBR-55/65X900E...
  • Page 82 DISASSEMBLY 1. XBR-55X900E 1-24. BRACKET, SIDE (SBT) BRACKET, SIDE (SBT) XBR-55/65X900E...
  • Page 83 DISASSEMBLY 1. XBR-55X900E 1-25. BRACKET, IR IN AND IR Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 84 DISASSEMBLY 1. XBR-55X900E 1-25. BRACKET, IR IN AND IR NOTE: BRACKET, IR IN Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 85 DISASSEMBLY 1. XBR-55X900E 1-26. UNIVERSAL SIL-TU NOTE: UNIVERSAL SIL-TU 2 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 86 DISASSEMBLY 1. XBR-55X900E 1-27. BMKS 7 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 BMKS XBR-55/65X900E...
  • Page 87 DISASSEMBLY 1. XBR-55X900E 1-28. SHEET, THERMAL (TPZ BBE) AND SHEET, THERMAL(BM) NOTE: SHEET, THERMAL(BM) SHEET, THERMAL (TPZ BBE) XBR-55/65X900E...
  • Page 88 DISASSEMBLY 1. XBR-55X900E 1-29. PLATE, MAIN S (SBT) 2 screws (SCREW, +LH M3X3 (PUC)) P/N: 4-690-738-01 PLATE, MAIN S (SBT) PLATE, MAIN S (SBT) 2 screws (SCREW, +LH M3X3 (PUC)) P/N: 4-690-738-01 XBR-55/65X900E...
  • Page 89 DISASSEMBLY 1. XBR-55X900E 1-30. BRACKET, STAND L (L SBT) Screw (PULLEY, STAND (HWI)) P/N: 4-534-964-01 BRACKET, STAND L (L SBT) 4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 90 DISASSEMBLY 1. XBR-55X900E 1-31. BRACKET, STAND R (L SBT) Screw (PULLEY, STAND (HWI)) P/N: 4-534-964-01 BRACKET, STAND R (L SBT) 4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 91 DISASSEMBLY 1. XBR-55X900E 1-32. BRACKET, VESA (MIA) 4 screws (SCREW, +PSW M4X8) P/N: 2-580-600-01 BRACKET, VESA (MIA) XBR-55/65X900E...
  • Page 92 DISASSEMBLY 1. XBR-55X900E 1-33. CUSHION, CORNER(SBT) AND LCD PANEL CUSHION, CORNER(SBT) LCD PANEL CUSHION, CORNER(SBT) XBR-55/65X900E...
  • Page 93 DISASSEMBLY 1. XBR-55X900E 1-34. SHIELD, T-CON (SBT) AND GASKET(SP GNT) 2 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 4 screws (SCREW M3X2.7 (SBT)) P/N: 4-690-476-01 SHIELD, T-CON (SBT) GASKET(SP GNT) XBR-55/65X900E...
  • Page 94 DISASSEMBLY 1. XBR-55X900E 1-35. FFC (49/55/65) AND GASKET, TCON CN (CRN) AND SHEET, THERMAL(BM) FFC (49/55/65) GASKET, TCON CN (CRN) SHEET, THERMAL(BM) XBR-55/65X900E...
  • Page 95 DISASSEMBLY 1. XBR-55X900E 1-36. E-T-CON (55) 3 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 E-T-CON (55) XBR-55/65X900E...
  • Page 96 DISASSEMBLY 1. XBR-55X900E 1-37. WIRE DRESSING AND SHIELD, LD (L SBT) SHIELD, LD (L SBT) 4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 97 DISASSEMBLY 1. XBR-55X900E 1-38. LD35 LD35 XBR-55/65X900E...

  • Page 98: Xbr-65X900E

    DISASSEMBLY 2. XBR-65X900E 2-1. STAND NECK (R) (L SBT) A AND STAND NECK (L) (L SBT) A AND STAND BASE (L SBT) A 4 screws (SCREW, +PSW M5X12) P/N: 2-580-607-01 STAND NECK (R) (L SBT) A STAND NECK (L) (L SBT) A STAND BASE (L SBT) A 4 screws ( SCREW, STAND (SBT)) P/N: 4-692-700-01 XBR-55/65X900E...
  • Page 99 DISASSEMBLY 2. XBR-65X900E 2-2. BADGE, XBR LOGO(H3.7) BADGE, XBR LOGO(H3.7) P/N: 4-535-586-02 2-3. COVER, CARD (2L SBT) COVER, CARD (2L SBT) XBR-55/65X900E...
  • Page 100 DISASSEMBLY 2. XBR-65X900E 2-4. LABEL, REAR TERMINAL (SBT) AND LABEL, SIDE TERMINAL (SBT) LABEL, REAR TERMINAL (SBT) LABEL, SIDE TERMINAL (SBT) XBR-55/65X900E...
  • Page 101 DISASSEMBLY 2. XBR-65X900E 2-5. REAR COVER (2L SBT) A NOTE: 4 screws (SCREW, ORNAMENTAL M6X12) P/N: 4-268-126-02 5 screws (SCREW +BVTP 3X10 TYPE2 IT-3) P/N: 7-685-647-79 15 screws (SCREW M3X3.0 STEP) P/N: 4-579-926-01 REAR COVER (2L SBT) A XBR-55/65X900E...
  • Page 102 DISASSEMBLY 2. XBR-65X900E 2-6. TAPE AND WIRE DRESSING NOTE: TAPE TAPE TAPE XBR-55/65X900E...
  • Page 103 DISASSEMBLY 2. XBR-65X900E 2-7. SP-BOX ASSY, FY17 W25LARGE-EL SP-BOX ASSY, FY17 W25LARGE-EL XBR-55/65X900E...
  • Page 104 DISASSEMBLY 2. XBR-65X900E 2-8. TAPE NOTE: TAPE TAPE TAPE XBR-55/65X900E...
  • Page 105 DISASSEMBLY 2. XBR-65X900E 2-9. TAPE AND WIRE DRESSING NOTE: TAPE TAPE TAPE XBR-55/65X900E...
  • Page 106 DISASSEMBLY 2. XBR-65X900E 2-10. SP-BOX ASSY, FY17 W25LARGE-ER SP-BOX ASSY, FY17 W25LARGE-ER XBR-55/65X900E...
  • Page 107 DISASSEMBLY 2. XBR-65X900E 2-11. TAPE AND WIRE DRESSING NOTE: TAPE TAPE TAPE XBR-55/65X900E...
  • Page 108 DISASSEMBLY 2. XBR-65X900E 2-12. BT ANTENNA Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 BT ANTENNA XBR-55/65X900E...
  • Page 109 DISASSEMBLY 2. XBR-65X900E 2-13. WIRE DRESSING XBR-55/65X900E...
  • Page 110 DISASSEMBLY 2. XBR-65X900E 2-14. SMART CORE (S) NOTE: SMART CORE (S) 2 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 111 DISASSEMBLY 2. XBR-65X900E 2-15. SWITCH UNIT (3M-P) AND HOLDER SIDE SW (PDT) Screw (SCREW M3X3.0 STEP) P/N: 4-579-926-01 SWITCH UNIT (3M-P) HOLDER SIDE SW (PDT) XBR-55/65X900E...
  • Page 112 DISASSEMBLY 2. XBR-65X900E 2-16. HARNESS ASSY (MAIN) AND WLAN/BT MODULE(11AC) HARNESS ASSY (MAIN) P/N: 1-910-112-08 WLAN/BT MODULE(11AC) 2 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 113 DISASSEMBLY 2. XBR-65X900E 2-17. TSA2 AND BRACKET, TS (PUC) BRACKET, TS (PUC) TSA2 Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 114 DISASSEMBLY 2. XBR-65X900E 2-18. TAPE AND WIRE DRESSING AND CONNECTOR ASSY 30P TAPE CONNECTOR ASSY 30P P/N: 1-910-112-09 XBR-55/65X900E...
  • Page 115 DISASSEMBLY 2. XBR-65X900E 2-19. BRACKET, DC JACK (SBT) AND JK BRACKET, DC JACK (SBT) 4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 116 DISASSEMBLY 2. XBR-65X900E 2-20. TAPE AND FLEXIBLE FLAT CABLE 30P NOTE: FLEXIBLE FLAT CABLE 30P P/N: 1-910-112-07 TAPE XBR-55/65X900E...
  • Page 117 DISASSEMBLY 2. XBR-65X900E 2-21. TAPE NOTE: TAPE TAPE TAPE TAPE XBR-55/65X900E...
  • Page 118 DISASSEMBLY 2. XBR-65X900E 2-22. FLEXIBLE FLAT CABLE 41P AND TAPE AND FLEXIBLE FLAT CABLE 51P FLEXIBLE FLAT CABLE 41P P/N: 1-849-887-11 NOTE: FLEXIBLE FLAT CABLE 51P P/N: 1-849-892-11 TAPE XBR-55/65X900E...
  • Page 119 DISASSEMBLY 2. XBR-65X900E 2-23. SLIDE, CLAMP SLIDE, CLAMP SLIDE, CLAMP XBR-55/65X900E...
  • Page 120 DISASSEMBLY 2. XBR-65X900E 2-24. BRACKET, SIDE (SBT) BRACKET, SIDE (SBT) XBR-55/65X900E...
  • Page 121 DISASSEMBLY 2. XBR-65X900E 2-25. BRACKET, IR IN AND IR Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 122 DISASSEMBLY 2. XBR-65X900E 2-25. BRACKET, IR IN AND IR NOTE: BRACKET, IR IN Screw (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 123 DISASSEMBLY 2. XBR-65X900E 2-26. UNIVERSAL SIL-TU NOTE: UNIVERSAL SIL-TU 2 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 124 DISASSEMBLY 2. XBR-65X900E 2-27. BMKS 7 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 BMKS XBR-55/65X900E...
  • Page 125 DISASSEMBLY 2. XBR-65X900E 2-28. SHEET, THERMAL (TPZ BBE) AND SHEET, THERMAL(BM) NOTE: SHEET, THERMAL(BM) SHEET, THERMAL (TPZ BBE) XBR-55/65X900E...
  • Page 126 DISASSEMBLY 2. XBR-65X900E 2-29. PLATE, MAIN S (SBT) 2 screws (SCREW, +LH M3X3 (PUC)) P/N: 4-690-738-01 PLATE, MAIN S (SBT) PLATE, MAIN S (SBT) 2 screws (SCREW, +LH M3X3 (PUC)) P/N: 4-690-738-01 XBR-55/65X900E...
  • Page 127 DISASSEMBLY 2. XBR-65X900E 2-30. BRACKET, STAND L (L SBT) Screw (PULLEY, STAND (HWI)) P/N: 4-534-964-01 BRACKET, STAND L (L SBT) 4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 128 DISASSEMBLY 2. XBR-65X900E 2-31. BRACKET, STAND R (L SBT) Screw (PULLEY, STAND (HWI)) P/N: 4-534-964-01 BRACKET, STAND R (L SBT) 4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 129 DISASSEMBLY 2. XBR-65X900E 2-32. BRACKET, VESA (MIA) 4 screws (SCREW, +PSW M4X8) P/N: 2-580-600-01 BRACKET, VESA(MIA) BRACKET, VESA (MIA) XBR-55/65X900E...
  • Page 130 DISASSEMBLY 2. XBR-65X900E 2-33. CUSHION 825C AND CUSHION, CORNER(SBT) AND LCD PANEL CUSHION 825C LCD PANEL CUSHION, CORNER(SBT) CUSHION, CORNER(SBT) XBR-55/65X900E...
  • Page 131 DISASSEMBLY 2. XBR-65X900E 2-34. SHIELD, T-CON (SBT) <Sequence Information> 2 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 <Sequence Information> SHIELD, T-CON (SBT) 4 screws (SCREW M3X2.7 (SBT)) P/N: 4-690-476-01 XBR-55/65X900E...
  • Page 132 DISASSEMBLY 2. XBR-65X900E 2-35. SHEET, THERMAL(BM) AND FFC (49/55/65) AND E-T-CON (65) SHEET, THERMAL(BM) FFC (49/55/65) E-T-CON (65) 3 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 133 DISASSEMBLY 2. XBR-65X900E 2-36. TAPE, SHADING FFC (SBT) AND SHIELD, LD (L SBT) TAPE, SHADING FFC (SBT) <Sequence Information> SHIELD, LD (L SBT) 4 screws (SCREW, +PSW M3X6) P/N: 4-472-518-11 XBR-55/65X900E...
  • Page 134 DISASSEMBLY 2. XBR-65X900E 2-37. LD45 LD45 XBR-55/65X900E...

  • Page 135: Smart Core (S)

    DISASSEMBLY 3. SMART CORE (S) 3-1. COVER, TOP (FRE) COVER, TOP (FRE) Hook XBR-55/65X900E...
  • Page 136 DISASSEMBLY 3. SMART CORE (S) 3-2. PANEL, ORNAMENT (FRE) PANEL, ORNAMENT (FRE) 3-3. GUIDE, LIGHT (FRE) GUIDE, LIGHT (FRE) XBR-55/65X900E...
  • Page 137 DISASSEMBLY 3. SMART CORE (S) 3-4. HSC3-L AND CASE, BOTTOM (SBT) NOTE: CASE, BOTTOM (SBT) HSC3-L XBR-55/65X900E...

  • Page 138: Exploded Views

    EXPLODED VIEWS • Items with no part number and no description are not stocked because they are seldom required for routine service. • The construction parts of an assembled part are indicated with a collation number in the remark column. •...
  • Page 139 EXPLODED VIEWS 1. XBR-55X900E LCD PANEL REF. No. PART No. DESCRIPTION MARK A-2170-004-A P-MOD (YD7S550DND01B) 4-588-223-01 SHEET, THERMAL (TPZ BBE) 4-549-186-01 SHEET, THERMAL(BM) 4-690-221-01 CUSHION, CORNER(SBT) 4-598-764-61 BRACKET, SIDE (SBT) FOR UC2 4-598-764-11 BRACKET, SIDE (SBT) FOR LA1 A-2170-502-A COMPL SVC BMKS_UC_KS FOR UC2 A-2170-504-A COMPL SVC BMKS_MX_KS...
  • Page 140 EXPLODED VIEWS 1. XBR-55X900E CONNECTORS REF.NO. PART No. DESCRIPTION MARK 1-849-886-11 FLEXIBLE FLAT CABLE 41P 1-849-891-11 FLEXIBLE FLAT CABLE 51P 1-910-112-04 FLEXIBLE FLAT CABLE 30P 1-910-112-05 HARNESS ASSY (MAIN) 1-910-112-06 CONNECTOR ASSY 30P XBR-55/65X900E...
  • Page 141 EXPLODED VIEWS 1. XBR-55X900E SCREWS REF. DESCRIPTION PART No. SCREW, ORNAMENTAL M6X12 4-268-126-02 SCREW +BVTP 3X10 TYPE2 IT-3 7-685-647-79 SCREW, +PSW M3X6 4-472-518-11 SCREW, +PSW M4X8 2-580-600-01 SCREW, +LH M3X3 (PUC) 4-690-738-01 SCREW, +PSW M3X6 W12 4-256-393-12 SCREW M3X3.0 STEP 4-579-926-01 PULLEY, STAND (HWI) 4-534-964-01...
  • Page 142 EXPLODED VIEWS 1. XBR-55X900E LD35 AND E-T-CON (55) REF. No. PART No. DESCRIPTION MARK A-2170-127-A LD35 COMPL 1-897-101-11 MOUNTED PWB E-T-CON (55) 4-549-186-01 SHEET, THERMAL(BM) 4-588-914-01 GASKET(SP GNT) 4-567-217-01 GASKET, TCON CN (CRN) XBR-55/65X900E...

  • Page 143: Xbr-65X900E

    EXPLODED VIEWS 2. XBR-65X900E REAR COVER REF. No. PART No. DESCRIPTION MARK 4-579-994-01 HOLDER SIDE SW (PDT) 1-474-647-12 SWITCH UNIT (3M-P) 4-690-471-11 REAR COVER (2L SBT) A 4-684-171-01 COVER, CARD (2L SBT) 4-689-432-01 LABEL, REAR TERMINAL (SBT) 4-689-385-01 LABEL, SIDE TERMINAL (SBT) 1-859-201-11 SP-BOX ASSY, FY17 W25LARGE-EL 4-688-748-01...
  • Page 144 EXPLODED VIEWS 2. XBR-65X900E LCD PANEL REF. No. PART No. DESCRIPTION MARK A-2170-005-A P-MOD (YD7S650DND01B) 4-588-223-01 SHEET, THERMAL (TPZ BBE) 4-549-186-01 SHEET, THERMAL(BM) 4-690-221-01 CUSHION, CORNER(SBT) 4-599-202-11 BRACKET, DC JACK (SBT) 8-594-302-80 UNIVERSAL SIL-TU SUT-RA243ZP 4-598-764-61 BRACKET, SIDE (SBT) A-2170-502-A COMPL SVC BMKS_UC_KS A-2167-845-A IR MOUNT...
  • Page 145 EXPLODED VIEWS 2. XBR-65X900E CONNECTORS REF.NO. PART No. DESCRIPTION MARK 1-849-887-11 FLEXIBLE FLAT CABLE 41P 1-849-892-11 FLEXIBLE FLAT CABLE 51P 1-910-112-07 FLEXIBLE FLAT CABLE 30P 1-910-112-08 HARNESS ASSY (MAIN) 1-910-112-09 CONNECTOR ASSY 30P XBR-55/65X900E...
  • Page 146 EXPLODED VIEWS 2. XBR-65X900E SCREWS REF. DESCRIPTION PART No. SCREW, ORNAMENTAL M6X12 4-268-126-02 SCREW +BVTP 3X10 TYPE2 IT-3 7-685-647-79 SCREW, +PSW M3X6 4-472-518-11 SCREW, +PSW M4X8 2-580-600-01 SCREW, +LH M3X3 (PUC) 4-690-738-01 SCREW M3X3.0 STEP 4-579-926-01 PULLEY, STAND (HWI) 4-534-964-01 XBR-55/65X900E...
  • Page 147 EXPLODED VIEWS 2. XBR-65X900E LD45 AND E-T-CON (65) REF. No. PART No. DESCRIPTION MARK A-2170-128-A LD45 COMPL 1-897-099-11 MOUNTED PWB E-T-CON (65) 4-549-186-01 SHEET, THERMAL(BM) XBR-55/65X900E...

  • Page 148: Smart Core (S)

    EXPLODED VIEWS 3. SMART CORE (S) REF. No. PART No. DESCRIPTION MARK 4-596-104-01 COVER, TOP (FRE) 4-596-101-01 PANEL, ORNAMENT (FRE) 4-596-102-01 GUIDE, LIGHT (FRE) A-2066-086-A HSC3_L MOUNT 4-686-122-01 CASE, BOTTOM (SBT) XBR-55/65X900E...

  • Page 149: Other Part

    EXPLODED VIEWS 4. OTHER PART ACCESSORIES REMOTE COMMANDER (RMF-TX200U) BAG, SCREW A (CCT) P/N: 1-493-127-31 P/N: 4-462-871-02 SCREW, +PSW M5X12 2-580-607-01 BAG,SCREW A (SBT) AC ADAPTOR (200W) P/N: 4-689-279-01 P/N: 1-493-326-11 SCREW, STAND (SBT) 4-692-700-01 AC ADAPTOR(240W) STAND NECK (L) (L SBT) A P/N: 4-686-203-01 P/N: 1-493-117-31 STAND NECK (R) (L SBT) A...
  • Page 150 EXPLODED VIEWS 4. OTHER PART MISCELLANEOUS PART No. DESCRIPTION MARK 4-548-743-01 HOLDER, HS WS (MUF) 4-549-188-01 HOLDER(HS MUF) 4-584-547-01 HEAT SINK(MUFF2 C) 4-687-148-01 SHEET, THERMAL (PIQ A) 4-687-840-01 HEAT, SINK(MS) 7-600-040-44 ADHESIVE (SV380C) 333CC GRY 4-535-586-02 BADGE, XBR LOGO(H3.7) 4-581-672-01 CATCH, HOOK 4-262-708-04 CLAMPER, CABLE...

  • Page 151: B Cover

    English 2017AL08-Data Made in Japan 9-888-810-01 © 2017. 1 Sony Visual Products Inc. XBR-55/65X900E...

  • Page 152: Voice Remote Control

    APPENDIX-1 Voice Remote Control • This remote has the following functions: • Key “MIC” key: Bluetooth • Voice search • Key codes (except “MIC” key) are sent by IR code. You can control all TVs without pairing. • “MIC” key code and voice data are sent by Bluetooth. Voice search function could be used with only the paired TV.

  • Page 153: Setting Voice Remote Control

    APPENDIX-1 Setting Voice Remote Control To register the Voice Remote Control to the TV 1. Press the HOME button, select [Settings]  [Voice Remote Control]  [Activate the button] then, follow the on-screen instruction. 2. Prepare Voice Remote Control. 3. Press and hold down the Volume-down key. 4.

  • Page 154: Reset Vs. Factory Reset

    APPENDIX-2 Reset vs. Factory Reset Reset: Press and hold down the power button (approx. 5 seconds) on the remote commander until the message “Power off” appears on the TV screen The TV will turn off, and then restart automatically Try a reset when Android TV doesn’t behave properly (e.g., the TV is unresponsive or is stuck on a black screen). Note if you unplug and plug in the power cable, it may have the same effect as a reset.

  • Page 155: Other Part Replacement Which Synchronize With Panel Replacement

    APPENDIX-3 Other part replacement which synchronize with panel replacement ex. The figure is 65 " CUSHION, CORNER(SBT) CUSHION 825C (Himeron tape) 49”/55”/65” : 4pcs 65” only *LABEL, SIDE TERMINAL 75” : 2pcs (SBT) is necessary for Panel replacement. XBR-55/65X900E...

  • Page 156: Table Of Contents

    Table of contents F COVER APPENDIX-1 MODEL LIST Voice Remote Control WARNINGS AND CAUTIONS How to use voice search function SAFETY CHECK-OUT Setting Voice Remote Control SELF DIAGNOSIS FUNCTION APPENDIX-2 ADJUSTMENT Reset vs. Factory Reset USB UPDATE APPENDIX-3 TROUBLE SHOOTING Other part replacement which synchronize with panel replacement TRIAGE FLOW...

Table of Contents