Parts And Consumable Parts Setup - Sharp FO-3800M Servise Manual

Accessories list
Model
Tray (Universal)
Drum cartridge
TD cartridge (1.5K)
Original cover
AC power cord
Printer cable IEEE1284
USB
Phone cable
Driver soft
Operation manual Copier
Printer
FAX
Warranty card (Registration card)
MSDS sheets
POP label
Dust cover
User card (Aiyousya card)
Digital logo
B. Releasing lock
REMOVING PROTECTIVE PACKING MATERIALS
1) Remove tape (a).
2) Turn and remove the lock screw in the arrow direction.
3) Remove the protective material (b).
(a)
Keep the fixing screw inside the front cover.
Store the lock screw at the right side inside the front cover.

3. Parts and consumable parts setup

(1) Developer cartridge
1) Push gently on both sides of the front cover to open the cover.
FO-3800M
Included
Installed
Included
Included
Included UL, CSA PLG
Included
N/A
Included
CD-ROM
Included (SEC*)
Included (SEC*)
Included
Included (SEC*) in manual
Included
N/A
N/A
N/A
N/A
(b)
Do not remove with
the front cover closed.
2) Remove the protective material (c), and slowly pull the protective
sheet (d) and protective material (e) together toward you to
remove. Be careful not to break the protective sheet (d) midway
and not to remain torn part inside the machine.
3) Remove the TD cartridge from the bag. Hold the cartridge on both
sides and shake it horizontally four or five times.
CAUTION: Be sure to remove the protective paper from the drum
cartridge before installing the TD cartridge.
4) Remove the protective tape and then the protective cover.
5) Hold the handle of the TD cartridge so that the stamped marking
on top of the cartridge are facing upward.
6) Gently insert the TD cartridge into the copier along the guides in
the direction indicated by the arrow.
Align the projections on both sides with the guides.
4 – 2
FO-3800M
(d)
(e)
(c)