CONTENTS
PARTS NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
REAR PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
MODE SWITCHING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
RESET FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
ON MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ON MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
MENUS DISPLAYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
CAMERA SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
FEATURES
This unit can display live camera images in full screen mode or
in a split screen (4 or 9 divisions). Recorded pictures can also be
displayed in a split screen.
•
The field switcher function can, during recording, display the
images full screen or full screen sequentially.
•
The multi-viewer function can, during live images mode,
display the images in a split screen and record the images as
displayed.
•
High-speed switching (up to single field switching)
•
The following operations are possible at each camera
according to the timer settings:
•
Programmed recording of certain or all cameras only can be
done according to the day or night periods.
•
Different alarm durations of certain or all cameras can be set
according to the day or night periods.
•
Live or recorded pictures of certain or all cameras can be
masked so they are not visible according to the day or night
periods.
•
Automatic switching delay can be set for each camera
according to the day or night periods.
•
Video sensor points areas can be set for each camera.
Trigger can start alarm recording operations in priority.
•
If the video signal is interrupted at any of the cameras, the
frozen image just previous to the interruption or test chart can
be displayed (selectable for each camera).
•
The unit can be controlled by computer through the RS232C
connection.
•
A system controller (sold separately) can be used through the
RS485 (RJ-11) connection.
•
Up to 100 alarm entries can be displayed on-screen.
ACCESSORIES
1
Power cord x1
2
Fixer, Power cord tie x1
2
To mount this unit onto a rack, please use the rack mount
hardware sold separately.
2
English