Table of Contents
Advertisement
MULTI-VIEWER MODE
To select the multi-viewer mode, in the (MONITOR SET) menu set MULTI MODE to ON. The display on the monitor will switch
to split screen mode (see page 32).
VCR PLAYBACK MODE
VCR
VCR PLAYBACK MODE OPERATIONS STEPS ON MONITOR
•
Full screen operations (see page 17)
•
4 divisions split screen operations (see page 19)
•
Multi-display screen operations (see page 19)
English
Press the VCR button.
The VCR playback display mode is selected. When a tape is played back, the
recording on the tape will be displayed on the monitor.
NOTE:
•
During VCR playback there is no output at the VCR OUT terminal and recording is
therefore not possible.
•
When playing back a tape recorded in multi-viewer mode (MULTI MODE set to
ON), the pictures will only be played back as recorded and it will therefore not be
possible to switch the display mode (full screen or split screen).
•
When playing back a tape recorded in field switcher mode, even if the viewing
mode is set to multi-viewer, the display of the playback picture will be the recorded
field switcher mode.
21
VCR playback mode
Advertisement
Table of Contents
