Attaching Identification Labels To Usb Cables; Connecting An Iphone With Lightning Connector; Connecting Via The Usb Port - Pioneer SPH-DA120 Installation Manual

Connection
Attaching identification
labels to USB cables
Attach identification labels to USB cables be-
fore installing this product in a vehicle.
1 Connect USB cables to the USB port 1
and 2 on the rear of this product.
2 Attach the identification labels corre-
sponding to each port to the USB cables as
illustrated below.
Attach the "PORT 1" label to the USB cable
connected to the USB port 1.
Attach the "PORT 2" label to the USB cable
connected to the USB port 2.
Connecting an iPhone with
Lightning connector
Notes
! For details on how to connect an external de-
vice using a separately sold cable, refer to the
manual for the cable.
! For details concerning the connection, opera-
tions and compatibility of iPhone, refer to Op-
eration Manual.

Connecting via the USB port

The USB interface cable for iPod / iPhone (CD-
IU52) (sold separately) is required for the con-
nection.
USB port 1
USB port 2
iPhone with
Lightning connector
USB cable
1.5 m
USB interface cable for iPod / iPhone
(CD-IU52) (sold separately)
Section
02
This product
13
Engb