Napoleon Gourmet Grill Instruction Manual page 4

1. BIPT450 BUILT-IN INSTRUCTIONS
N080-0213
N080-0213
N570-0026
N715-0080
N010-0281
W445-0031
N010-0568
This grill is designed for MASONRY, NON-COMBUSTIBLE enclosures only, and must be installed and serviced by a qualified installer
to local codes.
1. Attach side mounting brackets to each side of the grill using #14 x 1/2" screws (n570-0026).
2. Lay the rear trim piece across the back of the opening. To keep it in place, a dab of silicone may be applied to each wing of the
rear trim.
3. Lower the unit in place, and connect the flex supply line to the fitting at the end of the manifold.
4. The entire installation must be leak tested before operating the unit.