Grill Operation: Meat Probe; Meat Probe Instructions - Firecraft Pellet-Q450 Assembly And Instruction Manual

Grill Operation: Meat Probe

A
B
C

Meat Probe Instructions

Your Pellet-Q450™ includes a high-quality Meat Probe used to determine you food's internal
temperature without opening your grill's lid. To use the Probe:
1. Plug Meat Probe in Meat Probe Jack (G) on your AccuTemp™ Digital Control.
2. Start grill per SUBSEQUENT START-UP Instructions on pages 15-16.
3. Press Probe Display (F) button on your AccuTemp™ Digital Control until Meat Light (H)
is illuminated. NOTE – Probe Display (F) button and Meat Light (H) are disabled if Meat
Probe is not connected to AccuTemp™ Digital Control.
4. Press Temp Display (E) button until Set (H) light is illuminated. Set your meat's done
cooking" internal temperature by using Temperature Control buttons (C).
5. When pellets begin to smoke, place food on Cooking Grates.
6. Insert Meat Probe into your food and close Cooking Chamber Lid.
7. Press Temp Display (E) button until Actual (H) light is illuminated. The AccuTemp™
Digital Control will now display internal temperature of your food.
8. Press Probe Display (F) button on your AccuTemp™ Digital Control to toggle between
grill temperature and meat temperature. The Grill (H) light illuminates when AccuTemp™
Digital Control displays grill temperature and Meat light (H) illuminates when AccuTemp™
Digital Control displays meat temperature.
9. When food reaches your set "done cooking" internal temperature, the AccuTemp™
Digital Control automatically reduces grill to a minimal temperature to prevent over
cooking and shows DONE on digital display. At any point during cooking, you can modify
grill or meat temperatures.
10. Clean Meat Probe using warm water but NEVER submerge Probe in water.
Submerging Probe could damage Probe and void your FireCraft warranty.
D
17
H H
G
E F
H H