Table of Contents
Advertisement
Quick Links
Pellet-Q450
™
Sear Station
™
Assembly and Instruction Manual
#
33115.0001
TO REDUCE RISK OF DEATH, SERIOUS INJURY OR PROPERTY
DAMAGE: READ ALL SAFETY MESSAGES AND UNDERSTAND ALL
INSTRUCTIONS AND PROCEDURE NOTICES BEFORE ATTEMPTING TO
ASSEMBLE OR USE THIS PRODUCT. FOLLOW ALL INSTRUCTIONS AND
WARNINGS WITH PRODUCT & OWNER'S MANUAL.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Firecraft Pellet-Q450
Summary of Contents for Firecraft Pellet-Q450
- Page 1 Pellet-Q450 ™ Sear Station ™ Assembly and Instruction Manual 33115.0001 TO REDUCE RISK OF DEATH, SERIOUS INJURY OR PROPERTY DAMAGE: READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUCTIONS AND PROCEDURE NOTICES BEFORE ATTEMPTING TO ASSEMBLE OR USE THIS PRODUCT. FOLLOW ALL INSTRUCTIONS AND WARNINGS WITH PRODUCT & OWNER’S MANUAL.
- Page 2 Before You Begin: Congratulations on your purchase of the Pellet-Q450™ Sear Station™ ! When unpacking, check to make sure all parts are included and not damaged due to shipping. If any part is missing or broken, please call Customer Service at 800-745-6109 as soon as possible.
- Page 3 IMPORTANT PRODUCT SAFETY TIPS ALWAYS: USE IN vENTILATED OUTDOOR AREA FREE FROM FLAMMABLE vAPORS, STORED LIQUIDS OR AEROSOLS. KEEP TOP, BOTTOM & SIDES OF PELLET GRILL AT LEAST 18” AWAY FROM ANY COMBUSTIBLE SURFACE. USE ONLY FIRECRAFT® OR OTHER APPROvED FOOD GRADE SMOKE PELLETS. NOT STOvE OR HEATING PELLETS. SURFACES AND GRILL ARE HOT! ALWAYS USE GLOvES & PROPER GRILLING TOOLS WHEN ADJUSTING RACKS OR FOODS. UNPLUG AND ALLOW GRILL TO COMPLETELY COOL BEFORE CLEANING, STORAGE OR REPAIR. NEvER: LEAvE GRILL UNATTENDED OR ALLOW CHILDREN TO USE OR PLAY NEARBY. TOUCH OR PROBE PELLET IGNITER WHEN GRILL IS OPERATING. PLACE HANDS IN OR ALLOW CLOTHING OR JEWELRY NEAR PELLET HOPPER OR SCREW AUGER LOCATED AT BOTTOM OF HOPPER. IF PELLETS BECOME CLOGGED, OR SMOKER UNIT DAMAGED, UNPLUG BEFORE ATTEMPTING REPAIR. ALLOW GREASE OR GRILLING SCRAPS TO ACCUMULATE IN TRAP, OR AROUND GRILL. CAREFULLY ExTINGUISH ANY FLAMES THROUGH REDUCING HEAT SETTING, SUFFOCATION OR BAKING SODA. USE GRILL IF ANY PORTION OR CORD IS DAMAGED. UNPLUG, ALLOW TO COOL AND CONSULT OWNER’S MANUAL FOR TROUBLESHOOTING AND REPAIR ADvICE. FOR CALIFORNIA RESIDENTS: PROPOSITION 65 NOTICE EvEN NATURAL WOOD SMOKE AND THE BYPRODUCTS OF ITS COMBUSTION CONTAIN CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIvE HARM. ...
- Page 4 In order to use the Sear Station™, your FireCraft® Pellet-Q450™ MUST have a diffuser plate with an Open Flame Port. If the serial number of your Pellet-Q450™ is #00123 or lower, or has a solid diffuser plate with no Open Flame Port, DO NOT attempt to use the Sear Station or the Open Flame Setting on your AccuTemp™...
- Page 5 How to Install Make sure that your Pellet-Q450™ is turned off and is completely cool. Remove the small left grill grate from the cooking chamber. Next, remove the small metal cover from the Open Flame Port. The Sear Station™ grates have male and female edges. Interlock the two panels by fitting the male and female edges together then lay the Sear Station™...
- Page 6 Use the provided tool to remove debris from between the rails. It is safe to occasionally clean the Sear Station™ in hot soapy water. Your Sear Station™ is NOT dishwasher safe. DO NOT use oven cleaner to clean your Sear Station™. Customer Service service@firecraft.com FireCraft 1-800-745-6109...
- Page 7 FireCraft any obligation or liability in connection not extend the Limited Warranty. Pouring hot with the sale of this product. This means that no liquids on or in your FireCraft product will void this warranties, either expressed or implied are warranty. Any modification including holes or extended to persons who purchase the product screws will void this warranty.
Need help?
Do you have a question about the Pellet-Q450 and is the answer not in the manual?
Questions and answers