Bad Case; Good Case - Friedrich M18YJ Installation Manual

12
3
Pull back the tubing holder.
4
Remove the pipe port cover and position
the piping.
Back side view
Tubing holder
Right
Backwards
* The feature can be changed according to the
type of model.

Good case

- Press the tubing cover and slowly unfold the
tubing to downward. And then bend to the
left side slowly.

Bad case

- Following bending case from right to left
directly may cause damage to the tubing.
Pipe Port
Left
* The feature can be changed according to the
type of model.
Installation Information. For right piping.
Follow the instruction above.
- Before bending the tubing, set the conduit
like picture below by using the bracket and
black screws from accessory kit.
CAUTION
!
Type "D" Screw