Antenna And External Equipment Connection - Sansui SJX32HB-2CAF Owner's Manual

ANT IN
AV OUT ANT IN
AV OUT
L1in R1in V1 in
YPbPr
L IN 1 R IN 1 V IN 1
CD/DVD Player
YPbPr INPUT AV INPUT
Note : Selecting a Source
Press TV/AV key on remote or SOURCE key on front panel keypad. A source OSD will appear to select a
source press OK/Right or Left key on the remote or VOL + key from front panel. Press TV/AV key or source
key repeatedly to change and select source. Up/Down key on the remote or CH+/- on front panel
can be used to change sources.
HDMI
Audio in
VGA INPUT
HDMI INPUT
HDMI INPUT: -
1. Connect the HDMI(High Definition Multimedia Interface) cable from the DVD HDMI
Output socket to the HDMI socket of the TV.
2. Set the HDMI mode in DVD Player (Refer User Manual of DVD Player).
Note: - TV can receive the Video and Audio signal simultaneously by using HDMI cable.
R L VIDEO
USB
ANT IN
AV OUT
NOTE: - CH +/ CH - keys on Remote are represented by CH+/CH- on the TV set.
VOL+/VOL- keys on remote are represented by VOL+/VOL- on the TV set.
ANTENNA CONNECTION: -
Connect Antenna cable to the ANT IN Socket on rear of the TV. For Good
operation of the set, good signal is required. In the strong signal area, an
indoor antenna could be used, otherwise an outdoor antenna should be used
Note: -
The aerial cable should not be bundled to the power cord.
COMPONENT (YCbCr/YPbPr) DVD INPUT: -
1. Connect the component outputs (YCbCr / YPbPr) of DVD player to the
component (YPbPr) input of the TV.
2. Connect audio outputs (L/R) of a DVD player to the audio input YPbPr.
3. Press the PLAY button on the DVD player.
AV INPUT: - 1.Connect the composite VIDEO output
2. Connect audio outputs (L/R) of a player to the
3. Press the PLAY button on the Player.
VGA INPUT: -
VGA
output socket of the PC to the VGA IN socket of the TV.
2. Connect the audio cable from the PC to the VGA Audio
IN socket of the set.
3. Switch on the PC and PC screen appears on the TV set.
The set can be operated as PC monitor.
Note: -
A.
when the set is switched ON. This is normal, there is
nothing wrong with the set.
B.
Some dot defects may appear on the screen, like Red/
Green/Blue spots. However, this will have no impact or
effect on the TV/Monitor performance.
AV OUT: -
This connection is used for connecting the TV/AV,
signal from TV SET 1 to TV SET 2.
MULTIMEDIA: -
Multimedia source on source OSD by pressing TV/AV key.
HDMI
Press OK / Right key on remote, connected USB is listed,
press OK to enter in selected USB Multimedia. Similarly front
panel keys CH+/- and VOL+ can be operated as Up/Down
and OK/Right keys on remote respectively.
of player to AV1.
audio input AV in.
1. Connect the VGA cable from the monitor
If the set is cold, there may be a small flicker
Connect / Insert standard USB and select